Range Rover 2005

Thread starter shaneannigans
Start date Jun 1, 2021

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

backinblack

Well-Known Member

Full Member

Jun 2, 2021

#21

gold rover said:
Just out of curiosity, does the 2005 Td6 , with touch screen, also have the round control on console? Or does it only have some bits for the changeover ?

Mine doesn't have the round control.

shaneannigans

Member

Jun 3, 2021

#22

brianp38dse said:
Most of the ecu`s on an l322 have to be programmed to the car
Have a look at the bmw inpa software its a free down load just need cable and works with the early cars , if you have an l322 you need your own diag it will save you a lot of time and money

Thank you for your help I will have a look at that and order a BCM.
Meny thanks shane

shaneannigans

Member

Jun 3, 2021

#23

gold rover said:
Just out of curiosity, does the 2005 Td6 , with touch screen, also have the round control on console? Or does it only have some bits for the changeover ?

I'm does not have the round control
Just some bits you can see are different

Shane

shaneannigans

Member

Jun 11, 2021

#24

Hi update on my issue, change the BCM reprogrammed, still the same could it be the steering angel sensor?
Thanks Shane

You must log in or register to reply here.

Similar threads

Replies: 15

Views: 649

Range Rover Message Centre

Replies: 17

Views: 1K

RRS Sport 4.2sc 2005 Transmission Fault Error Codes

2

Replies: 21

Views: 1K

Sport Pressure does not decrease when venting gallery

Replies: 19

Views: 2K

P0A94 2011 4.4 TDV8 Range Rover

2

Replies: 33

Views: 2K

Share:

Reddit Pinterest Tumblr WhatsApp Email Link

Welcome To LandyZone, the Land Rover Forums!

Here at LandyZone we have plenty of very knowledgable members so if you have any questions about your Land Rover or just want to connect with other Landy owners, you're in the right place.

Registering is free and easy just click here, we hope to see you on the forums soon!