radiator

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

daren92

Member
Posts
51
pipes hot not solid done fan mod and not cooling but they do make rad cold but pipes and top of rad still very hot, when it starts to get towards overheating if i put heater to hot and blower to half or full gauge goes back down this makes me think baffle has taken a walk in the rad.

any input
thanks
 
Tested rad seems to have baffle so thinking head
But then thoughts I would get new rad got one from budget radiators good service checked rad and noticed old one had metal pipe,
So blew down new over flow air went into rad ok did not check old one (could this be the problem) but what the heck car so far stable temperature range on nanocom 95 to 98.4 in traffic only problem now is imobiliser inter link fault
 
Tested rad seems to have baffle so thinking head
But then thoughts I would get new rad got one from budget radiators good service checked rad and noticed old one had metal pipe,
So blew down new over flow air went into rad ok did not check old one (could this be the problem) but what the heck car so far stable temperature range on nanocom 95 to 98.4 in traffic only problem now is imobiliser inter link fault
Engine temp ok till towing very heavy trailer then goes up fans on all the time (mod with thermostat) even when not towing pressure ok when removing cap
New pump
Rad
Thermostat
 
Nothing obstructing air flow at the front like massive spot lights or winch?

Guess you could try a full flush and maybe even take the stat out for a bit.

I'm trying not to mention the possibility of HG.
 
Engine temp ok till towing very heavy trailer then goes up fans on all the time (mod with thermostat) even when not towing pressure ok when removing cap
New pump
Rad
Thermostat

Do you mean aircon fans? Make sure the condenser is not obstructed.
 
Yes air con fans they are on the mod
Thought about head gasket but pressure ok

Then make sure the condenser is not obstructed. I take it you mean Keiths mod. If head is cracked it will spew coolant when crack opens. Is this auto or manual?
 
Then make sure the condenser is not obstructed. I take it you mean Keiths mod. If head is cracked it will spew coolant when crack opens. Is this auto or manual?
Auto and does not loose fluid temp range on namocom 90 to103
 
Back
Top