Radiator panel S3
- Thread starter John S
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
tottot
Well-Known Member
- Posts
- 7,499
- Location
- west wales coast
If it's the usual corrosion along the bottom two/three inch's have a welder put in a new section.Straight forward job.
chris7
Well-Known Member
- Posts
- 1,310
- Location
- Spalding, Lincolnshire
John....you cant buy a lower repair section...it has to be fabricated...I did mine as I too had serious corrosion....the trouble is that most of these on donor Landy are going to be in similar condition....its what I found..hence the repair.......Chris
honolulujoe
Well-Known Member
- Posts
- 6,137
- Location
- richmond surrey
http://www.bits4landys.co.uk/s3_parts.htm
bottom repair section in list
I an sure I have seen a full remanufactured panel somewhere, been looking, can't see it though
bottom repair section in list
I an sure I have seen a full remanufactured panel somewhere, been looking, can't see it though
dominicbeesley
Well-Known Member
- Posts
- 1,701
- Location
- Hebden Bridge, West Yorkshire
I don't think you can buy a repair section. I just used a bit of angle iron and filled the rest with scraps and weld. It's held up ok so far. And my welding is pretty poor!
dominicbeesley
Well-Known Member
- Posts
- 1,701
- Location
- Hebden Bridge, West Yorkshire
Joe, I'm not sure that's the bit he means if you mean 330443, that's a splash panel underneath the wing.
Here's some pictures of my fixing attempt https://www.landyzone.co.uk/land-rover/radiator-panel-needed.223316/#post-2585990
D
Here's some pictures of my fixing attempt https://www.landyzone.co.uk/land-rover/radiator-panel-needed.223316/#post-2585990
D
tottot
Well-Known Member
- Posts
- 7,499
- Location
- west wales coast
It is just an L shaped bit of steel.Done a few myself,can be done flush if as original wanted or with overlap if you just want it fixed.Front valance covers it anyway.
honolulujoe
Well-Known Member
- Posts
- 6,137
- Location
- richmond surrey
Land Raver
Well-Known Member
- Posts
- 2,015
- Location
- In the dog house
Ashtree Land Rover will do a refurb and galvanise it but not cheap at £175
mistericeman
Active Member
- Posts
- 977
Have a word with Liz and her hubby Tony on here .....
https://www.facebook.com/groups/leafersatthepit/search/?query=liz wood
They will supply AND post either standard depth OR a deeper section repair section ....very reasonably priced AND fantastic Kwality ...
https://www.facebook.com/groups/leafersatthepit/search/?query=liz wood
They will supply AND post either standard depth OR a deeper section repair section ....very reasonably priced AND fantastic Kwality ...
