P38A puddle lights

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Joss155

Joss155

Well-Known Member
Posts
577
Location
Poole
How easy is it to retrofit the puddle lights in the foot wells? Is the connector there already and if it is will they work or does the BECM need to be told they are there like everything else.
 
You mean foot well lamps? Puddle lamps are in bottom of doors. Look at diagrams in RAVE. Foot well lamps work with courtesy lamps.
 
Yes mate. Sorry when looking them online they seem to be the same part. A square lamp with a connector. So does it just plug in?
 
Thanks mate. Looks like the connectors are different and many mixed up on various websites too.
 
:D don't know what you mean mate. Now I've got to find a connector that is either taped up out of sight or not there. :rolleyes:
 
Joss155 said:
:D don't know what you mean mate. Now I've got to find a connector that is either taped up out of sight or not there. :rolleyes:
Click to expand...

Two pin white plug, one either side. Pin 1 Purple wire. Pin 2 Purple wire with Red tracer. Harness should be there it also feeds key lock illumination. Good luck.
 
Puddle lamps are there on my DT. I've seen some LED ones on the Bay of E with a Range Rover logo that is projected onto the pavement! Someone on here fitted them and I must say it is a bit gimmicky but I like it. Think they are actually for the L322 but with a bit of fettling they should fit.
 
Grrrrrr said:
Puddle lamps are there on my DT. I've seen some LED ones on the Bay of E with a Range Rover logo that is projected onto the pavement! Someone on here fitted them and I must say it is a bit gimmicky but I like it. Think they are actually for the L322 but with a bit of fettling they should fit.
Click to expand...

Do they also have them with the Land rover logo and an arrow pointing towards the driver as he opens the door with i am a nob written on it? :D:D
 
wammers said:
Two pin white plug, one either side. Pin 1 Purple wire. Pin 2 Purple wire with Red tracer. Harness should be there it also feeds key lock illumination. Good luck.
Click to expand...

Perfect. Cheers mate. What would we do without you......

Grrrrrr said:
Know what you're saying. They are a bit Blackpool!
Click to expand...

I saw some of these on a Defender in my mates workshop. They do look a bit tack IMO but he seemed to like them.
 
So to finally update. I bought the lamps. Stripped the underside of the dash but the loom hasn’t got the wires or the connectors. Going to have another look in the daylight bit I feel a reoccuring theme here after the undertray debacle. Seems 95’s are missing a few things.
 
Last edited:
Yeah that’s it. Right one? Think you can see the purple wires and plug for the lights on the 3rd picture top right
 
You must log in or register to reply here.

Similar threads

B
07 l322 3.6 tdv8 no ignition lights or crank
Replies
8
Views
594
Blindmiller
B
B
L494 keep disconnecting airbag connector uner seat
Replies
4
Views
400
Mark Piercy
Mark Piercy
Blob
L322 AFS Headlight retrofit?
Replies
0
Views
470
Blob
Blob
Grrrrrr
P38A Horn connector
2
Replies
32
Views
2K
Dippypud
Dippypud
P
L322 Flickering rear lights
Replies
18
Views
2K
Parkheadbhoy
P
Back
Top