L322 Problems with the ds2 bus (k-bus), I cannot change configurations and load them, there is no communication with the blocks.

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Danil89Sever

New Member
Posts
1
Hi all.
I encountered such a problem that it became necessary to enable pulse-width modulation in the configurations in order to get rid of the viscous coupling and install an electric fan for cooling, then after changing the configurations in the SDD through the engineering menu, it was not saved and eventually produced errors for the blocks that are interconnected by the ds2 bus (k-bus), I'm stuck here. The blocks that are indicated in the screenshot are ❌ without connection. Tell me, has anyone encountered this problem? I will be grateful for any help🤝🏻.
Range Rover l322, 2007, 4.4 petrol
4251829A-2D80-4B64-AF45-FC08AA7950E9.jpeg
63740CB7-43DC-452B-BEB3-A2CA8D28B14D.jpeg
D4550683-A2A1-4A60-B775-83A79E7BDC51.jpeg
C0CBD53C-004A-44CC-9BDD-D08F50F50F6D.jpeg
IMG_8287.jpeg
 

Attachments

  • IMG_8174.jpeg
    IMG_8174.jpeg
    305.8 KB · Views: 85
  • C0CBD53C-004A-44CC-9BDD-D08F50F50F6D.jpeg
    C0CBD53C-004A-44CC-9BDD-D08F50F50F6D.jpeg
    268.6 KB · Views: 81
  • 63740CB7-43DC-452B-BEB3-A2CA8D28B14D.jpeg
    63740CB7-43DC-452B-BEB3-A2CA8D28B14D.jpeg
    143 KB · Views: 75
  • D4550683-A2A1-4A60-B775-83A79E7BDC51.jpeg
    D4550683-A2A1-4A60-B775-83A79E7BDC51.jpeg
    278.4 KB · Views: 80
  • IMG_8287.jpeg
    IMG_8287.jpeg
    74.3 KB · Views: 78
Last edited:
I had this and slow load times, it was a bad cable, luckily since im known for having stuff missing or broken i ordered 2 at the same time
 
Back
Top