P38A PRESSURE GAUGE

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Grrrrrr said:
Got one on mine. Cannot remember which one I put it on now. THINK it was the one to the tank.
Click to expand...

How about one plumbed into the compressor outlet so you can see when the compressor fails. And one plumbed into the tank feed so you can confirm that the compressor has failed. You could also have a gauge connected to each corner feed so you can monitor differing pressures in each individual bag as the car is loaded. You could have dual gauges for each function to ensure the first gauge was reading correctly. Now that's a system. :p:D:D:D
 
wammers said:
How about one plumbed into the compressor outlet so you can see when the compressor fails. And one plumbed into the tank feed so you can confirm that the compressor has failed. You could also have a gauge connected to each corner feed so you can monitor differing pressures in each individual bag as the car is loaded. You could have dual gauges for each function to ensure the first gauge was reading correctly. Now that's a system. :p:D:D:D
Click to expand...

Or even go the full hog, and have one on each valve block outlet, and at the air-bags to check for leaks on the airlines. It then follows to have one at each end of the tank feed.

I have used one on the tank feed during testing, and then removed the tee & guage afterwards.
 
pwood999 said:
maybe repurpose this system to monitor the corners, etc.
https://www.vtstore.co.uk/accessori...eW3OI831iMs1dC4rpn6kxhML_WzbcWE4TEaAjUf8P8HAQ

or better still just maintain the EAS so it doesn't need monitoring !!
Click to expand...

I was messing about.

Had a lot of issues when I bought the car. Now I just run a trace every 6 months to check the overall health of the system.

It might help with diagnostics but as you said, extra joints just add leaks. My emergency EAS kit leaks like f...

still, the gadget-head part of me still likes the idea.
 
You must log in or register to reply here.

Similar threads

8v_chris
Air leak detection - EAS woes!
2 3
Replies
52
Views
4K
j38
J
miktdish
Oil pressure gauge
Replies
5
Views
992
Al2O3
Al2O3
R
Series 3 temperature gauge help required
Replies
6
Views
537
R Morris
R
R
Fuel gauge level.
Replies
1
Views
396
Brown
Brown
RogueV8
Temperature gauge jumps to HOT when I turn the key (prior to turning over)
Replies
2
Views
682
tottot
tottot
Back
Top