power to interior lights

hi all am at the stage where my aux battery is going in.
it will run my aux reversing lights and back work lights.
I also wont to power my interior lights from it to.
is the best way of doing this.
run a wire from my aux battery (with inline fuse) to the fuse box, remove fuse and plug wire
into the side that feeds the lights. (or is that to simple )
thanks
j

I would be careful with that....
In the good ol` days interior lights were permanantly live and had a switched earth through the door pins, so your plan would be fine but the Freelander lights are controlled from the CCU. Personally, I wouldnt be messing with that.

Wot 'e said....

You could, however, switch to panel LEDS for much more light at much lower power consumption hence not running down the main battery.

dave21478 said:

I would be careful with that....
In the good ol` days interior lights were permanantly live and had a switched earth through the door pins, so your plan would be fine but the Freelander lights are controlled from the CCU. Personally, I wouldnt be messing with that.

Click to expand...

They are still wired similar. The switch on the light controls one earth path, the CCU the other.

so can of worms then.
thanks anyway people