Power steering

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

tango90

Member
Posts
66
Location
Ireland
I wonder if anyone can help? I have had the power steering pump off my 1993 200tdi 90 and I am trying to refit it but when I try to fit the hose(10) to the rear of the pump with the the banjo bolt(9) the hose connector is tight against the rear of the pump housing and wont allow the hose connection to seal properly all the fittings are original as far as I can see in the manual. The hose isnt long enough to turn the banjo fitting downwards it has to go up to the rear of the pump.

upload_2019-11-20_11-55-57.png
 
can you turn nut no 10 so a flat face is against the pump rather than a point? Are you sure washers no 5 and 6 are in place to space it out from the pump body? I don't suppose it would do any harm to put another no 6 washer in if you're desperate!
 
Back
Top