Disco 3 (LR3) Power Seat Control Removal?

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
D

DryFly3

New Member
Posts
2
Hello - New here.....Passenger seat power works in every direction except to tilt the seat back. Does anyone know how to remove the plastic molding that the power switch controls are attached to? Thanks !
 
Hi

If u look at the lower seat panel it has screws on the back of it , right by the seat slider rails , think there Phillips screws,

Then the actual seat power module is also screwed in from the back

Hope that helps
 
gstuart said:
Hi

If u look at the lower seat panel it has screws on the back of it , right by the seat slider rails , think there Phillips screws,

Then the actual seat power module is also screwed in from the back

Hope that helps
Click to expand...
Thanks! - I can see that there seems to be a screw but it's very difficult to get at since it's pretty tight between the plastic and the side of the seat. I'll see if I can access it a bit better somehow.
 
DryFly3 said:
Thanks! - I can see that there seems to be a screw but it's very difficult to get at since it's pretty tight between the plastic and the side of the seat. I'll see if I can access it a bit better somehow.
Click to expand...
Ur so welcome

U can use a socket with a small Phillips bit can also attach a flexible bar

Indeed is fidly and I’ll often use the Halfords advanced tools as they have such a good range of tools

Hope that helps
 
You must log in or register to reply here.

Similar threads

S
Help 2007 sport seat
Replies
4
Views
740
gstuart
gstuart
S
Disco4 rough idle after injector issues
Replies
8
Views
589
Stevie135
S
L
Disco 3 (LR3) Mirror adjust switch removal
Replies
1
Views
147
LR-hobbs
L
julianf
Heated seat kits for 300tdi era defender seats...
Replies
7
Views
540
dag019
dag019
S
Freelander 2 (LR2) Brake Pedal Cruise Control Switch
Replies
0
Views
306
Stevelander 2
S
Back
Top