possible rear diff bushes

haigy · Mar 11, 2015

My fl1 never had prop on it.since owning it i bought a prop fitted new ujs and vcu bearings fitted back on the car and when engagein year and taken off it feels like a bang at back end.

Got under neath and shook prop no movement shook rear diff and it moves a bit so is it likely to be the diff brackets and bushes

gareth123 · Mar 11, 2015

haigy said:
My fl1 never had prop on it.since owning it i bought a prop fitted new ujs and vcu bearings fitted back on the car and when engagein year and taken off it feels like a bang at back end.

Got under neath and shook prop no movement shook rear diff and it moves a bit so is it likely to be the diff brackets and bushes

Most likely the front mount of the diff. Qutie straightforward to replace and cheap.

haigy · Mar 11, 2015

So just change the front 1 not the 2 at each side at back

teddywood1 · Mar 11, 2015

the back one's hardly ever wear out but the front one does if you take all three off I am told on here you can replace the front one first then put the back two back on.

haigy · Mar 12, 2015

Am i better off gettin the poly bush 1 for 11 quid or just the standard 1 at 8 quid

teddywood1 · Mar 12, 2015

may be as poly bush do last longer but I have never bothered .

Hippo · Mar 13, 2015

The standard fit centre diff mount has a rubber middle to reduce vibrations and allow a little movement.
The plastic middle type won't.

haigy · Mar 13, 2015

So just standard 1 will do then

Hippo · Mar 14, 2015

haigy said:
So just standard 1 will do then

Yep that's my preference.

http://www.landyzone.co.uk/lz/f69/rear-diff-mount-replacement-how-guide-101774.html

possible rear diff bushes

haigy

Well-Known Member

gareth123

Active Member

haigy

Well-Known Member

teddywood1

Well-Known Member

haigy

Well-Known Member

teddywood1

Well-Known Member

Hippo

Lord Hippo

haigy

Well-Known Member

Hippo

Lord Hippo

Similar threads