Turboman
Mab An Gov
- Posts
- 60,151
- Location
- Lathrowda, Kernow
Donor identity is a last resort. Hopefully, you will be able to locate the original VIN or chassis number, and off you go.
Possible purchase
- Thread starter Matty Remover
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Matty Remover
Member
- Posts
- 17
- Location
- Kent
Matty Remover
Member
- Posts
- 17
- Location
- Kent
Yes mate I really hope so somebody has said that from the registration number and engine number I should be able to research the chassis number I did one of those pay for vehicle history checked online for a couple of quid but that only gives you a few numbers at the end of the Vinh number I’ll just see how I get on but I’m not going to part with any cash until I know that I can register it
brianp38dse
Well-Known Member
- Posts
- 19,593
- Location
- heathrow
Hello and welcome
Colthebrummie
Well-Known Member
- Posts
- 9,870
- Location
- Thatcham
If the seller only wants £150 and it looks relatively complete, I'd snatch his hand off and worry about finding it's I.D. later, you'll have plenty of time whilst doing it up. You say you haven't the room to break it which makes me wonder if you have the room to restore it. Good luck with it anyway.
Col
Col
Matty Remover
Member
- Posts
- 17
- Location
- Kent
Matty Remover
Member
- Posts
- 17
- Location
- Kent
Yeah I hear you it’s just not for me if I’ve got to interfere with the id it needs to be able to be registered as for the room I’ve got room for it if I can work on it not for it to stand there whole it’s stripped then for the bits to sit around for donkeys while half of the people that buy don’t turn up or want to wande about and change their minds lol
Hippo
Lord Hippo
- Posts
- 51,937
Welcome to the forum
Looks like it's been out in the rain for some time.
At 150 sovs, get it quick before someone else does. Get a photo of the seller as proof of who yer got it from. Worst case is yer strip it for bits. Tratter parts sell easily online. It's probably why so many are nicked. I never have problems selling on the parts from tratters I have acquired.
Looks like it's been out in the rain for some time.
At 150 sovs, get it quick before someone else does. Get a photo of the seller as proof of who yer got it from. Worst case is yer strip it for bits. Tratter parts sell easily online. It's probably why so many are nicked. I never have problems selling on the parts from tratters I have acquired.
Marmaduke
Well-Known Member
- Posts
- 9,773
- Location
- Near the land of 'Me Duck'
Have you sat down and costed everything up Matty? That is going to need a substantial amount spending on it and at what you'll be paying for it it's good for stripping only, I know how much money had gone into mine and that things a shed. Take more pictures but that's a donor not a restoration project imho and I've bought a few
