Possible diff probelms HELP

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
yeah but the outter parts ie the rubber and outter steal cage ain t all that, the actual bearings are perfect the rest is just moulded on
 
ok fella will do, thanks for the support I appreciate it. Will also try taking a little pressure of the diff a little to move the prop up a few mm. Thank you again
 
One other thing to make sure of is that there is OIL in the rear axle diff casing.

Just be sure there is - have a peek ...

CharlesY
 
Hey there, what was the outcome with your droning noise from the back?
Just had an independant replace my vcu and support bearings, as well as the diff oil seal and I have the exact same symptoms you describe!...The garage are replacing the collapsible bearing in the diff nose for a start but after that i'd like some ammunition to throw at the :eek:)

cheers ears,
 
Angry-Swan said:
heres another idea if i ve damaged the inner race on the bearing pressing it on would that make the same sort of noise?
Click to expand...
Damaged bearing races do make a droning noise. Did you use a tube over the shaft to push on the inner race when fitting them, or did you push on the outer race? If the latter then you will have damaged the bearings during fitting them. SKF quote "under no circumstances should pressure be applied to one ring in order to mount the other bearing ring".
 
You must log in or register to reply here.

Similar threads

C
Freelander 2 (LR2) Rear Diff Rumble / Judder Just Started
Replies
6
Views
842
CaptainB
C
ar1g3
P38A Front diff pinion wobble?
Replies
16
Views
933
FEI
FEI
GWOA
I need your help, Freelander 1 not starting. Immobilizer?
2
Replies
23
Views
1K
GrumpyGel
GrumpyGel
C
Newbie Freelander 2 with a vibration and rubbing noise
Replies
7
Views
1K
chubbygordito
C
C
HDC & 1 Amigo
2
Replies
23
Views
2K
coltron1
C
Back
Top