Possible 110 rebuild question

J

Jonnygearbox

Active Member

Posts

200

• Nov 14, 2013

• #1

I'm debating weither to get a 110 and completely rebuild it but I'm wondering if the likes of the b pillar and crossmember for the body can be bought instead or repairing it as in thinking of dismantling the whole body and sending it off to be painted as I put a recon engine into a new galvanised chassis so when it comes back the body has to be put on with wiring, anyway I'm rambling on just wanted to know if all the little body parts other than wings, bulkhead, doors can be got

 

trax

.

Events Planner

Posts

10,639

Location

Oxfordshire

• Nov 14, 2013

• #2

pretty much, you can get stuff elsewhere like yrm which do galved bits. chassis and bulkhead are the main bits you want sorted imo. the rest isn't so bad to do.

 

Last edited: Nov 14, 2013

Brown

Well-Known Member

Full Member

Posts

7,990

Location

East Midlands

• Nov 14, 2013

• #3

I see this place has got some parts that comprise the sill, B and C pillars
Body & Chassis for Land Rover Defender | LR Parts
Is this the sort of thing you're after?

 

J

Jonnygearbox

Active Member

Posts

200

• Nov 16, 2013

• #4

Yeah things like that I know where to get galvanised bulkhead from ashtree and Richards for chassis and gearbox crossmember

 

Landyjd

Active Member

Posts

333

Location

NZ

• Nov 17, 2013

• #5

Jonnygearbox said:

Yeah things like that I know where to get galvanised bulkhead from ashtree and Richards for chassis and gearbox crossmember

Click to expand...

Look more carefully at the webpage from the link - there are b pillars and side frames for 110s on there, like you were asking about.