Jonnygearbox
Active Member
- Posts
- 200
i had the same issue fitting bushes to the defender they where 'red' polybush and they fitted with a few taps
Polybush fitting
- Thread starter AlbertDefender90
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
AlbertDefender90
Active Member
- Posts
- 955
- Location
- Ellesmere, Shropshire
Yeah mine are the red ones aswell, was the tube wider than the bush on yours aswell?
Those pics look ok.
when I did myn I noticed and pondered the same.
the original bush, the shaft protrudes slightly, out of the hole on the arm it goes into, this is the same width as the new bush.
when you put them in it means the outer of each poly is almost/is touching the metal either side where it attaches to the main car.
i haven't noticed any binding or anything since putting them on.
when I did myn I noticed and pondered the same.
the original bush, the shaft protrudes slightly, out of the hole on the arm it goes into, this is the same width as the new bush.
when you put them in it means the outer of each poly is almost/is touching the metal either side where it attaches to the main car.
i haven't noticed any binding or anything since putting them on.
