Pneumatic Suspension

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
SO we plugged.this.into the hawkeye today i can adjust either side and set the height but it goes out of range every time its turned off and on the.front near side does look very low suspect broken front spring causing the issue
Yes... I will look at it... suspension now is back to different levels now again even that was settled to the right measurement succesfully earlier...but at least I know that module is working fine and will look at front spring and valve block.
Thank You Dave for time You spent trying to set up my suspension
 
Update... after so many checks ( airlines,valve block, swaping connectors/wiring in valve block) without success I put coil springs and problem solved,all straight and level now... new bushes on WATTS liks nad pivot joint,new antirollbar links and bushes... shortly after that one of rear caliper seized so two drilled discs ,EBC pads,new calipers with fresh fluid in the system done...I removed compressor fuse and there is no suspension error lights ...
IMG_9814.JPG
 
Back
Top