Plastiguage

B

Bill Payer

Guest

• Jan 31, 2006

• #1

Where the 4x4 can I buy Plastiguage from in UK?
Cheers.

 

L

LizzyTaylor

Guest

• Jan 31, 2006

• #2

Bill Payer wrote:

>Where the 4x4 can I buy Plastiguage from in UK?
>Cheers.
>
>
>
>

http://www.plastigauge.co.uk/

At the very bottom of their online ordering page you can buy a pack of
10 for a reasonable amount.

or

www.frost.co.uk (more expensive)

Lizzy

 

A

Alex

Guest

• Jan 31, 2006

• #3

On Tue, 31 Jan 2006 15:06:59 +0000, LizzyTaylor
<[email protected]> wrote:

>Bill Payer wrote:
>
>>Where the 4x4 can I buy Plastiguage from in UK?
>>Cheers.
>>
>>
>>
>>
>
>http://www.plastigauge.co.uk/
>
>At the very bottom of their online ordering page you can buy a pack of
>10 for a reasonable amount.
>
>or
>
>www.frost.co.uk (more expensive)
>
>Lizzy

At that price wouldn't a length of feeler stock be cheaper? Assuming
you only want it in one size for one job.

Alex

 

B

Badger

Guest

• Jan 31, 2006

• #4

"Alex" <[email protected]> wrote in message
news:[email protected]...
> On Tue, 31 Jan 2006 15:06:59 +0000, LizzyTaylor
> <[email protected]> wrote:
>
>>Bill Payer wrote:
>>
>>>Where the 4x4 can I buy Plastiguage from in UK?
>>>Cheers.
>>>
>>>
>>>
>>>
>>
>>http://www.plastigauge.co.uk/
>>
>>At the very bottom of their online ordering page you can buy a pack of
>>10 for a reasonable amount.
>>
>>or
>>
>>www.frost.co.uk (more expensive)
>>
>>Lizzy
>
> At that price wouldn't a length of feeler stock be cheaper? Assuming
> you only want it in one size for one job.
>
> Alex

Real Steel sell it as well, that's where I get mine from.
Badger.

 

S

Steve Taylor

Guest

• Jan 31, 2006

• #5

Alex wrote:
>
> At that price wouldn't a length of feeler stock be cheaper? Assuming
> you only want it in one size for one job.
>
> Alex

It does jobs shim stock can't possibly manage - like gauge the exact
radial clearance in big end bearing caps etc.

Steve

 

B

Bill Payer

Guest

• Feb 1, 2006

• #6

Thanks for replys, I've ordered a pack over t'internet.
Bill Payer.



"Steve Taylor" <[email protected]> wrote in message
news:[email protected]...
> Alex wrote:
>>
>> At that price wouldn't a length of feeler stock be cheaper? Assuming
>> you only want it in one size for one job.
>>
>> Alex
>
> It does jobs shim stock can't possibly manage - like gauge the exact
> radial clearance in big end bearing caps etc.
>
> Steve

 

A

Austin Shackles

Guest

• Feb 1, 2006

• #7

On or around Tue, 31 Jan 2006 18:09:47 +0000, Steve Taylor
<[email protected]> enlightened us thusly:

>Alex wrote:
>>
>> At that price wouldn't a length of feeler stock be cheaper? Assuming
>> you only want it in one size for one job.
>>
>> Alex
>
>It does jobs shim stock can't possibly manage - like gauge the exact
>radial clearance in big end bearing caps etc.

quite. There are a few jobs you can't do without it. I have to admit, I
tend not to do them on account of it.
--
Austin Shackles. www.ddol-las.net my opinions are just that
Soon shall thy arm, unconquered steam! afar Drag the slow barge, or
drive the rapid car; Or on wide-waving wings expanded bear the
flying chariot through the field of air.- Erasmus Darwin (1731-1802)