1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
  2. Welcome To LandyZone!

    LandyZone is the biggest Land Rover forum on the net. We have plenty of very knowledgable members so if you have any questions about your Land Rover or just want to connect with other Landy owners, you're in the right place.

    Registering is free and easy just click here, we hope to see you on the forums soon!

PIPE for DEFENDER 300 TDI brake vacuum pump

Discussion in 'Defender 90 / 110 / 130' started by slon4eto, Feb 21, 2019.

< Previous Thread | Next Thread >
  1. slon4eto

    slon4eto New Member

    Joined:
    Feb 21, 2019
    Posts:
    8
    Likes Received:
    0
    Location:
    Russia
    Hi everyone, I own a Defender 110 Hardtop 300 TDI 1997 MY. I would appreciate it a lot if you can urgently help me in finding the part number of the bend pipe (rubber hose) that is marked with red arrows in the photos posted below (Photo 1, 2 and 3) so that I could replace it as soon as possible. The pipe is short, factory bent and it’s two ends have different diameters. It is attached to the 300 TDI Brake Vacuum Pump.

    As you can see the one end is completely torn (the crack surrounded by a red line in Photo 3) and the white carcass is showing and I urgently need to replace it.

    Thank you in advance for the help.
     

    Attached Files:

  2. lynall

    lynall Well-Known Member

    Joined:
    Feb 28, 2011
    Posts:
    13,542
    Likes Received:
    7,530
    Location:
    Kent
    So long as the new pipe is reinforced it will do the job, Im sure you have motor factors and they will do vacuum hose.
     
  3. slon4eto

    slon4eto New Member

    Joined:
    Feb 21, 2019
    Posts:
    8
    Likes Received:
    0
    Location:
    Russia
    Thank you very much for the help.
     
< Previous Thread | Next Thread >