pic request pls or advice - 2" lift fitting....

Mark Disco said:

does somebody have a pic of a 2" lift fitted to a disco1 please? ideally i need a pic of where the front dislocation cones and rear dislocation cones go, where the spring retainers go front and rear, and where a 'securing ring' goes (i have 2 of these in the kit?). my lift kit arrived today but without any destructions or fitting guide and im a bit stumped by there parts.

failing that if i describe the parts would somebody be able to point me in the right direction as to where they go? parts are ....

dislocation cones x2 - cone shaped Rear / Top of spring.
dislocation cones x2 cylinder shaped Front / Top of Spring - which 1s are front/rear and are they mounted at the top or bottom of the spring?

2x round flat plates with 4 bolts coming out Turret Rings - Front, between springs and turrets- presume these are spring retainers but front or rear? fitted where?

2x half circle pieces with 2 bolts coming out of each Front / Bottom spring retainers - presume these are spring retainers again but front or rear? fitted where?

2x rectangular flat pieces with 2 bolts coming out of each Rear / Bottom spring retainers.- presume these go with the 2 pieces above somehow?

ive also got a pair of plastic rings about 2"-3" across - not got a freaking clue what these are?? - me neeva

i havent started taking anything apart yet so i havent had a chance to compare any of these parts to whats on the car already, and they arrived in 3 boxes mixed with a full set of bushes and a full brake set front and rear, again with no destructions :doh: once i know where everything goes, fitting will be relatively simple, but untill then im stuck with a pile of random chunks of metal in my lounge so any help very much appreciated

Mark

Click to expand...

Treworgey 90 said:

This is fer a Fender, but same suspension.
http://www.landyzone.co.uk/lz/f7/how-replace-200-tdi-defender-front-shock-absorber-57044.html

Click to expand...