P38A petrol v8s

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
badfluffy

badfluffy

Well-Known Member
Posts
2,259
Location
northampton
ok last rover v8 i rebuilt was the 3.5 so my question is how different other than cc is the Thor motor to the old 3.5, and the gems, reason for asking is the thor has no oil pressure but a friend has a spare gems, is it just a matter of switching over the intakes ect ?
 
Best to keep the discussions to one thread ?

But start with draining fluids & taking front cover off to check the oil pump. If it's ok, prime it, and put fresh oil in the engine & try again.
 
Does the oil warning light come on when ignition is turned on?
Oil pressure sender faulty?
 
Thor Motronic was allegedly an improvement over the GEMS injection system.
Before going to a lot of swap-over work I would try what @Datatek said and spin it over for a fair bit with the plugs out and plenty of oil showing on the dipstick and see if you can wind some oil pressure up.
Didn't a new oil pump used to entail packing it with vaseline or the like in order to get it to prime and suck oil up from the sump?
Standing for a long-long time will mean its as dry as a bone. I don't know it you can get oil into the pump from the reverse direction to prime it, so spinning it up on the starter is all that's left.
 
DanClarke said:
Thor Motronic was allegedly an improvement over the GEMS injection system.
Before going to a lot of swap-over work I would try what @Datatek said and spin it over for a fair bit with the plugs out and plenty of oil showing on the dipstick and see if you can wind some oil pressure up.
Didn't a new oil pump used to entail packing it with vaseline or the like in order to get it to prime and suck oil up from the sump?
Standing for a long-long time will mean its as dry as a bone. I don't know it you can get oil into the pump from the reverse direction to prime it, so spinning it up on the starter is all that's left.
Click to expand...
We used to fill the pump with oil during rebuilding, @Saint.V8 had an oil pressure problem,I'm sure there's a write up in the Technical archive , turned out to be the O ring on the oil pickup pipe if memory serves me correctly;):eek:
 
badfluffy said:
ok last rover v8 i rebuilt was the 3.5 so my question is how different other than cc is the Thor motor to the old 3.5, and the gems, reason for asking is the thor has no oil pressure but a friend has a spare gems, is it just a matter of switching over the intakes ect ?
Click to expand...

In theory yes but I think the Thor has some subtle differences. I don't think the threads changed but I think some of the Thor nuts/bolts were metric where they were imperial on the GEMS. Not sure about stud patterns and mounting points. Pretty sure some of the sensors were different too although I am sure it could be fettled to work. Might be wrong as I haven't had a Thor engine apart but I wouldn't expect a hassle free swap.
 
Key differences I know of: (apart from the obvious like manifolds & coils)
  • Camshaft sprocket gap are different
  • Crank sensor uses different flywheel teeth and different number of positions.
  • Engine wiring loom
  • BECM settings
 
pwood999 said:
Key differences I know of: (apart from the obvious like manifolds & coils)
  • Camshaft sprocket gap are different
  • Crank sensor uses different flywheel teeth and different number of positions.
  • Engine wiring loom
  • BECM settings
Click to expand...
well 2 3 and 4 wont be an issue if the original parts can swooped over
 
I think you need to do a little bit more investigation on your original engine. to establish what it is if its the oil pump then. And as that has to come off to get to the different camshaft sprocket to change then you may aswell sort the 1 you have.

If the front covers have to be changed it maybe pointless as that houses the oil pump.

J
 
You must log in or register to reply here.

Similar threads

A
P38A Head Gasket Kit & ARP Bolts ?
2
Replies
23
Views
1K
enjoi
enjoi
T
Weird enginenumber
Replies
0
Views
325
TonyKa
T
oakey
P38A Gems to Thor?
Replies
17
Views
2K
JUKE179r
JUKE179r
W
AirCon Problems L320 4.4 petrol 2005
Replies
12
Views
817
Graculus
Graculus
A
P38A Do I need an oil filler tube
Replies
6
Views
1K
AndyF07
A
Back
Top