coz1
Active Member
- Posts
- 396
- Location
- warwickshire
need a petrol rotavator to do an allotment please.
can anyone help?
as near to Coventry as possible.
cheers
can anyone help?
as near to Coventry as possible.
cheers
petrol rotavator
- Thread starter coz1
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Don't bother with those little cheap rotorvators, in my experience the heavier and thicker the blades the better 
Td5powers canon c8 is a good machine! And will turn over hard ground if not you can't go wrong with a good Honda, got a 30year old honda rotorvator in my shed, starts first pull and still going strong! Used lots!
Td5powers canon c8 is a good machine! And will turn over hard ground
if not you can't go wrong with a good Honda, got a 30year old honda rotorvator in my shed, starts first pull and still going strong! Used lots! coz1
Active Member
- Posts
- 396
- Location
- warwickshire
thanks for the offer td5,but that's a bit out of my league,cheers
Thor1950
Well-Known Member
- Posts
- 39,238
- Location
- Land of the midnight sun
get 2 spades and grab the mrs. like in the old days before the rototiller
biggeeeee
Retired - Living the dream
- Posts
- 11,090
- Location
- Lanarkshire or Argyll
JonnyP
Well-Known Member
- Posts
- 1,918
- Location
- Sunny Cornwall
get rid of all the couch grass before you rotorvate.. Unlike what I did
coz1
Active Member
- Posts
- 396
- Location
- warwickshire
coz1
Active Member
- Posts
- 396
- Location
- warwickshire
get rid of all the couch grass before you rotorvate.. Unlike what I did
the 'eggspurts' have told me that it would be ok to go straight over with the rotavator cuz all the weeds are just surface weeds and are nowt to worry about
the last person has looked after the plot quite well.
cheers
Thor1950
Well-Known Member
- Posts
- 39,238
- Location
- Land of the midnight sun
cut the roots and they will multiply, faster than a rabbit on a Saturday night
marccleave
Active Member
- Posts
- 644
- Location
- Dorset
Absolutely no help what so ever but I was using the rotavator last week and oil splasher disintegrated!!! Found out after taking it apart.
As I was using it, it started blowing smoke as the particles of metal went up and down the bores scraping them. Then the bottom end went a couple of seconds after it started blowing blue smoke! Stopped it rather quickly and didn't half scare me. Made bloody loud noises for a 5HP Briggs & Stratton engine.
Its quite ill, hopefully with a hone and new rings it'll be okay.
As I was using it, it started blowing smoke as the particles of metal went up and down the bores scraping them. Then the bottom end went a couple of seconds after it started blowing blue smoke! Stopped it rather quickly and didn't half scare me. Made bloody loud noises for a 5HP Briggs & Stratton engine.
Its quite ill, hopefully with a hone and new rings it'll be okay.
Last edited:
