Passenger Front Electric Window

Rachelkgr · Nov 20, 2013

2001 DHSE

When I click the button, nothing happens. When I bang the door panel, it works ok!!

What is it likely to be? Lose connection? Or something more expensive?

Rachel

Saint.V8 · Nov 20, 2013

Check the connections at the window motor and also at the point where the wiring loom leaves the A pillar and into the door for signs of corroded wires/pins etc...

Could also just be a stuck regulator mech.

Datatek · Nov 20, 2013

Saint.V8 said:
Check the connections at the window motor and also at the point where the wiring loom leaves the A pillar and into the door for signs of corroded wires/pins etc...

Could also just be a stuck regulator mech.

+1 and the guide channels sometimes come adrift jamming the window.

tomcat59alan · Nov 20, 2013

Haven't you just been working on your block connectors, A post/ footwell ? If so recheck your work

Rachelkgr · Nov 20, 2013

Thanks guys! Will pull door card off! And a good point re:connectors! Hadn't realised they may power the window.

Rachelkgr · Nov 24, 2013

Update! Pulled motor plug off, and refitted. Motor works fine now.

Rachelkgr · Dec 9, 2013

Window packed up immediately after last post. Turned out to be broken pin in white plug in footwell!

I am good electronics! Just crap at EAS systems lol!

Passenger Front Electric Window

Rachelkgr

Active Member

Saint.V8

Dyed-in-the-wool 100% RR Junkie

Datatek

Well-Known Member

tomcat59alan

Well-Known Member

Rachelkgr

Active Member

Rachelkgr

Active Member

Rachelkgr

Active Member

Similar threads