part number?

Kernow nige

New Member

Posts

1,286

Location

Landyless in KERNOW

• May 10, 2009

• #1

Hi peeps, can anyone tell me the part no. for a 'boost pressure sensor' please, think i might need to change mine.
ps...... are they easy to fit? ......... .

 

B

booboodag

Active Member

Posts

465

• May 10, 2009

• #2

Part No MHK101060L. I assume you mean the sensor that fits into the inlet manifold (map sensor) and not the turbo boost solenoid. We have a cranked spanner that we use to change them. We also have had some success in cleaning them with contact cleaner.

 

Chaser

New Member

Posts

2,175

• May 10, 2009

• #3

are you sure you mean boost pressure sensor? MAP sensor MHK101060L

not boost pressure solenoid ??? STC498

 

Last edited: May 10, 2009

B

booboodag

Active Member

Posts

465

• May 10, 2009

• #4

The above part No is for a TD4 as you did not say which engine you have

 

Kernow nige

New Member

Posts

1,286

Location

Landyless in KERNOW

• May 10, 2009

• #5

booboodag said:

The above part No is for a TD4 as you did not say which engine you have

Click to expand...

sorry guys it is for a TD4, map sensor..boost pressure sensor..are they the same part? .......

 

B

booboodag

Active Member

Posts

465

• May 10, 2009

• #6

yes they are the same and i think that landrover call it a multi injection pressure sensor, just to make sure that we have the right part the boost sensor is located on the inlet manifold

 

Kernow nige

New Member

Posts

1,286

Location

Landyless in KERNOW

• May 10, 2009

• #7

booboodag said:

yes they are the same and i think that landrover call it a multi injection pressure sensor, just to make sure that we have the right part the boost sensor is located on the inlet manifold

Click to expand...

multi injection pressure sensor, boost pressure sensor, map sensor, feck me what ave i started, what do i order, ..how much are they?
thanks for all the help mates, think i'll wang her in fer MOT an see what happens. all started after a recent blown turbo hose, usual black smoke symptoms, seems to be slightly smoking on hard acceleration now though.
again thanx fer all yer help.......

 

Chaser

New Member

Posts

2,175

• May 10, 2009

• #8

nigel8 said:

sorry guys it is for a TD4, map sensor..boost pressure sensor..are they the same part? .......

Click to expand...

Same part, not sure if it'll help your fault though. black smoke = too much fuel or not enough air. not really anything to do with boost/manifold pressure, more likely still got a slight air leak somewhere.