C
Chris Gear
Guest
Are they out there and if so how do I get them ?
thanks
thanks
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
E
Elwyn York
Guest
Chris Gear wrote:
> Are they out there and if so how do I get them ?
> thanks
Did you want the whole vehicle or just specific parts?
Have you tried the LR Service Manual, ie the actual book? Surely it would be
easier to read and work with
<FX: Ducks from incomming >
Elwyn
> Are they out there and if so how do I get them ?
> thanks
Did you want the whole vehicle or just specific parts?
Have you tried the LR Service Manual, ie the actual book? Surely it would be
easier to read and work with
<FX: Ducks from incomming >
Elwyn
T
Tim Hobbs
Guest
>Have you tried the LR Service Manual, ie the actual book? Surely it would be
>easier to read and work with
>
><FX: Ducks from incomming >
>
>Elwyn
I have both for the Disco. For reading prior to the job, the actual
book is brilliant (much easier than reading a screen). I then find
the same pages in RAVE, print those pages and blu-tak / tape them to
the back of the 101 for easy reference whilst oily.
--
Tim Hobbs
'58 Series 2 88" aka "Stig"
'77 101FC Ambulance aka "Burrt"
'95 Discovery V8i aka "The Disco" (FOR SALE)
'03 Volvo V70
My Landies? http://www.seriesii.co.uk
Barcoding? http://www.bartec-systems.com
Tony Luckwill web archive at http://www.luckwill.com
>easier to read and work with
>
><FX: Ducks from incomming >
>
>Elwyn
I have both for the Disco. For reading prior to the job, the actual
book is brilliant (much easier than reading a screen). I then find
the same pages in RAVE, print those pages and blu-tak / tape them to
the back of the 101 for easy reference whilst oily.
--
Tim Hobbs
'58 Series 2 88" aka "Stig"
'77 101FC Ambulance aka "Burrt"
'95 Discovery V8i aka "The Disco" (FOR SALE)
'03 Volvo V70
My Landies? http://www.seriesii.co.uk
Barcoding? http://www.bartec-systems.com
Tony Luckwill web archive at http://www.luckwill.com
C
Chris Gear
Guest
I am going to order a hard copy but a pdf would be useful until then ! ages
ago some body sent be a few pages via email but I didnt buy my p38 until
friday and I havent worked on it yet !
Which for me is a record a whole saturday withou getting covered in oil
grease and dirt !
"Tim Hobbs" <[email protected]> wrote in message
news:[email protected]...
> >Have you tried the LR Service Manual, ie the actual book? Surely it would
be
> >easier to read and work with
> >
> ><FX: Ducks from incomming >
> >
> >Elwyn
>
> I have both for the Disco. For reading prior to the job, the actual
> book is brilliant (much easier than reading a screen). I then find
> the same pages in RAVE, print those pages and blu-tak / tape them to
> the back of the 101 for easy reference whilst oily.
>
>
>
>
> --
>
> Tim Hobbs
>
> '58 Series 2 88" aka "Stig"
> '77 101FC Ambulance aka "Burrt"
> '95 Discovery V8i aka "The Disco" (FOR SALE)
> '03 Volvo V70
>
> My Landies? http://www.seriesii.co.uk
> Barcoding? http://www.bartec-systems.com
> Tony Luckwill web archive at http://www.luckwill.com
ago some body sent be a few pages via email but I didnt buy my p38 until
friday and I havent worked on it yet !
Which for me is a record a whole saturday withou getting covered in oil
grease and dirt !
"Tim Hobbs" <[email protected]> wrote in message
news:[email protected]...
> >Have you tried the LR Service Manual, ie the actual book? Surely it would
be
> >easier to read and work with
> >
> ><FX: Ducks from incomming >
> >
> >Elwyn
>
> I have both for the Disco. For reading prior to the job, the actual
> book is brilliant (much easier than reading a screen). I then find
> the same pages in RAVE, print those pages and blu-tak / tape them to
> the back of the 101 for easy reference whilst oily.
>
>
>
>
> --
>
> Tim Hobbs
>
> '58 Series 2 88" aka "Stig"
> '77 101FC Ambulance aka "Burrt"
> '95 Discovery V8i aka "The Disco" (FOR SALE)
> '03 Volvo V70
>
> My Landies? http://www.seriesii.co.uk
> Barcoding? http://www.bartec-systems.com
> Tony Luckwill web archive at http://www.luckwill.com
S
SteveG
Guest
On Sat, 24 Jul 2004 21:05:54 GMT, "Chris Gear"
<[email protected]> wrote:
>Are they out there and if so how do I get them ?
>thanks
>
Chris,
Email me off-group with your home address and I'll send you a copy
Regards
Steve G
email addy: s.goodfellow@idon'tlikespam.blueyonder.co.uk - remove the
obvious
Regards
Steve G
<[email protected]> wrote:
>Are they out there and if so how do I get them ?
>thanks
>
Chris,
Email me off-group with your home address and I'll send you a copy
Regards
Steve G
email addy: s.goodfellow@idon'tlikespam.blueyonder.co.uk - remove the
obvious
Regards
Steve G
E
Elwyn York
Guest
Chris Gear wrote:
> Are they out there and if so how do I get them ?
> thanks
Did you want the whole vehicle or just specific parts?
Have you tried the LR Service Manual, ie the actual book? Surely it would be
easier to read and work with
<FX: Ducks from incomming >
Elwyn
> Are they out there and if so how do I get them ?
> thanks
Did you want the whole vehicle or just specific parts?
Have you tried the LR Service Manual, ie the actual book? Surely it would be
easier to read and work with
<FX: Ducks from incomming >
Elwyn
S
SteveG
Guest
On Sat, 24 Jul 2004 21:05:54 GMT, "Chris Gear"
<[email protected]> wrote:
>Are they out there and if so how do I get them ?
>thanks
>
Chris,
Email me off-group with your home address and I'll send you a copy
Regards
Steve G
email addy: s.goodfellow@idon'tlikespam.blueyonder.co.uk - remove the
obvious
Regards
Steve G
<[email protected]> wrote:
>Are they out there and if so how do I get them ?
>thanks
>
Chris,
Email me off-group with your home address and I'll send you a copy
Regards
Steve G
email addy: s.goodfellow@idon'tlikespam.blueyonder.co.uk - remove the
obvious
Regards
Steve G
C
Chris Gear
Guest
I am going to order a hard copy but a pdf would be useful until then ! ages
ago some body sent be a few pages via email but I didnt buy my p38 until
friday and I havent worked on it yet !
Which for me is a record a whole saturday withou getting covered in oil
grease and dirt !
"Tim Hobbs" <[email protected]> wrote in message
news:[email protected]...
> >Have you tried the LR Service Manual, ie the actual book? Surely it would
be
> >easier to read and work with
> >
> ><FX: Ducks from incomming >
> >
> >Elwyn
>
> I have both for the Disco. For reading prior to the job, the actual
> book is brilliant (much easier than reading a screen). I then find
> the same pages in RAVE, print those pages and blu-tak / tape them to
> the back of the 101 for easy reference whilst oily.
>
>
>
>
> --
>
> Tim Hobbs
>
> '58 Series 2 88" aka "Stig"
> '77 101FC Ambulance aka "Burrt"
> '95 Discovery V8i aka "The Disco" (FOR SALE)
> '03 Volvo V70
>
> My Landies? http://www.seriesii.co.uk
> Barcoding? http://www.bartec-systems.com
> Tony Luckwill web archive at http://www.luckwill.com
ago some body sent be a few pages via email but I didnt buy my p38 until
friday and I havent worked on it yet !
Which for me is a record a whole saturday withou getting covered in oil
grease and dirt !
"Tim Hobbs" <[email protected]> wrote in message
news:[email protected]...
> >Have you tried the LR Service Manual, ie the actual book? Surely it would
be
> >easier to read and work with
> >
> ><FX: Ducks from incomming >
> >
> >Elwyn
>
> I have both for the Disco. For reading prior to the job, the actual
> book is brilliant (much easier than reading a screen). I then find
> the same pages in RAVE, print those pages and blu-tak / tape them to
> the back of the 101 for easy reference whilst oily.
>
>
>
>
> --
>
> Tim Hobbs
>
> '58 Series 2 88" aka "Stig"
> '77 101FC Ambulance aka "Burrt"
> '95 Discovery V8i aka "The Disco" (FOR SALE)
> '03 Volvo V70
>
> My Landies? http://www.seriesii.co.uk
> Barcoding? http://www.bartec-systems.com
> Tony Luckwill web archive at http://www.luckwill.com
Similar threads
Freelander 1
Parts Catalogue