p38a no heating

hi i have a 2000 p38a which i have brought back from the dead but i cannot get the heating to work the heater matrix has been flushed and appears to be circulating water i would be grateful for any info on what to do

Hello and welcome
Best to ask over in the range rover section of the forumhttps://www.landyzone.co.uk/forum/range-rover.10/

I know you say you have flushed the heater matrix so the best way to get the coolant flowing threw it is to pull 1 of the heater matrix hoses when the engines running and connect it to a hose with gentle flow then block it off at the engine side remove the header tank cap and let it over flow..................hope that makes sense works for me every time.
Good luck.

Hi there and welcome
Probably the blend motors are stuck on cold, if the book symbol is showing

Welcome to the forum