alarmfitter
New Member
- Posts
- 434
- Location
- romford essex
are the front ones hard to do any info please
p38 wheel bearing
- Thread starter alarmfitter
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Irishrover
Well-Known Member
- Posts
- 5,317
- Location
- La Trimouille, Vienne, France
Without a 30 ton Hydraulic Press..nigh on impossible to do them properly. Loads of heat will just melt the prepacked grease in the new bearings and they won't last five minutes.
PM me your email address and I will send you a write up of my procedure for doing them.
Then try local engineering shops or garages for location of a press and a few bits of suitable steel for mandrels and you are in to saving yourself a fortune. My advice if you are going to replace them is to do both sides...it's sods law that the other one isn't far behind.
PM me your email address and I will send you a write up of my procedure for doing them.
Then try local engineering shops or garages for location of a press and a few bits of suitable steel for mandrels and you are in to saving yourself a fortune. My advice if you are going to replace them is to do both sides...it's sods law that the other one isn't far behind.
alarmfitter
New Member
- Posts
- 434
- Location
- romford essex
thank you pm sent
- Posts
- 58,170
- Location
- Preston Lancs.
Where abouts are you? I have the press if your local to me.
alarmfitter
New Member
- Posts
- 434
- Location
- romford essex
thanks mate but im in essex
TAKdriver
Active Member
- Posts
- 621
- Location
- Beside a field in Midlothian
What will the stealers charge for doing both front bearings ?
Pikey
Dummy Ejection Facilitator..
- Posts
- 47,185
- Location
- in Baron Wet Bum's Slave pit..
£500 is my guess..
Think we need a sweepstake & yu can get a quote and let us know who was closest.
alarmfitter
New Member
- Posts
- 434
- Location
- romford essex
to much
nathan5346
Well-Known Member
- Posts
- 11,939
- Location
- oldbury
Anything else wrong with ur rangie?
alarmfitter
New Member
- Posts
- 434
- Location
- romford essex
a/c needs a regas seats need a clean passenger front door not locking drivers side front door open error message its a 1999 metalic gold dse 2 owners 140000 miles dealer history cream electric memory seats side steps colour coded bumpers superchipped drives spot on im now looking for 20" alloys
Irishrover
Well-Known Member
- Posts
- 5,317
- Location
- La Trimouille, Vienne, France
Stealers won't entertain just changing the bearing. They will only fit complete new hub at around £500 per side plus labour.
They won't even sell the bearing..it's not a stock item for them.
They won't even sell the bearing..it's not a stock item for them.
alarmfitter
New Member
- Posts
- 434
- Location
- romford essex
i best ring my old mate jon at lrr he knows a man that can
Similar threads
