my p38 has no side steps and think it looks a bit bare without them so was looking about for some and i like the look of the l322 crome side bars has anyone fitted these to a p38 or know if they can be fitted with a little persuasion as i know a few bits do swap over from the l322 to the p38, i dont know if the wheel base is the same length or not between the two cars???
p38 side runners
- Thread starter lee 2110
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
P38_Ireland
Well-Known Member
- Posts
- 1,392
- Location
- Co Wexford, Ireland
your dead right the P38 looks lost with out the side steps. personally i have the black rubber ones and i love them i know http://www.sidesteps.co.uk/ sell them ones but they might be the lads to ask about the L322 fitting the P38 i see they supply both
SAN XL
New Member
- Posts
- 50
- Location
- Nottingham
Hi
I think these are the ones your getting at - They look pretty similar to the new shape range rover metal tubes. But these are the only ones I've found on the Int-net. I've not bought a set as I think they are a bit pricy for what they are, (tubes of steel) but have to admit they do look good I've put the links on below - let me know if you do buy a set? They look like they are made for the P38
I'm also led to believe that the tubes that are applied to the new shape discovery can also be fitted to the P38 though I'm unsure of this - some of the other guys on the forum may know more
Enjoy
Range Rover Kits
4 tube side steps [sidestepsp38] - £500.00 : Pimp My Range, Range Rover Body Kits Online Store
I think these are the ones your getting at - They look pretty similar to the new shape range rover metal tubes. But these are the only ones I've found on the Int-net. I've not bought a set as I think they are a bit pricy for what they are, (tubes of steel) but have to admit they do look good I've put the links on below - let me know if you do buy a set? They look like they are made for the P38
I'm also led to believe that the tubes that are applied to the new shape discovery can also be fitted to the P38 though I'm unsure of this - some of the other guys on the forum may know more
Enjoy
Range Rover Kits
4 tube side steps [sidestepsp38] - £500.00 : Pimp My Range, Range Rover Body Kits Online Store
wow yeah there not cheap are they ill try find out if the l322 ones will fit as you can pick a second hand pair up for a lot less than that. failing that ill see if a fabrcator i know could put some together for a decent price surely cant be that hard to make with the right measurements
klf400
Active Member
- Posts
- 312
- Location
- forest of dean, gloucestershire
yes this is possible i have l322 chrome side bars on my p38
you need to offer them up and mark the hole position on chassis you are able to use one original holes but the other 3 have to be drilled then fit nut inserts into the holes to take the bolts
you also have to modify the rear bracket on the bars slightly
nice one thanx for that dont suppose you have any pics to hand that you could upload so i could see what they look like by anychanceyes this is possible i have l322 chrome side bars on my p38
you need to offer them up and mark the hole position on chassis you are able to use one original holes but the other 3 have to be drilled then fit nut inserts into the holes to take the bolts
you also have to modify the rear bracket on the bars slightly
klf400
Active Member
- Posts
- 312
- Location
- forest of dean, gloucestershire
yes ill try to post some picsnice one thanx for that dont suppose you have any pics to hand that you could upload so i could see what they look like by anychance
klf400
Active Member
- Posts
- 312
- Location
- forest of dean, gloucestershire
this pic is my 1998 4.6 and not the 2000 4.6 pic above ,this at present is the only pic i have when i fitted them firstnice one thanx for that dont suppose you have any pics to hand that you could upload so i could see what they look like by anychance
thanx mate they look quite nice think that will be the route ill be taking i prefer them the black side steps i reckon..this pic is my 1998 4.6 and not the 2000 4.6 pic above ,this at present is the only pic i have when i fitted them first
P38_Ireland
Well-Known Member
- Posts
- 1,392
- Location
- Co Wexford, Ireland
personally there not bad, better than having nothing at all but i think the black running boards are best
klf400
Active Member
- Posts
- 312
- Location
- forest of dean, gloucestershire
i have the black ones on my 2000 4.6 but can never decide which looks best
Similar threads
