P38A P38 Remote/Key Nightmare

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Nanocom about 350 quid from Blackbox Solutions. Check the Landyzone International map and see if there is anyone close who might be able to help if you cross their tongue with beer. Mind you, chips and cake seems to work as well.
Cake for the munching Manc Mozz. Where have you been Arthur? Got to grips with the new site yet:)
 
I best try and figure out this map business then. Need to try one on Air as sounds like it'll spur me on to ditch the coils I'm currently struggling with! But that's a different topic altogether...
 
Generic OBDII is only usable on the engine systems on a P38. Will not work on any other system. P38s are not apart from limited petrol engine data OBDII compliant, how you have got a alarm fault code out of it i do not know. .

Me neither on this one as the code isn't even listed on the Generic code list that came with the scanner.
Never the less for what it is and diagnosing engine sensors was very useful on my old 540i which was another German ignition system that had a typical appetite for engine sensors!
 
Me neither on this one as the code isn't even listed on the Generic code list that came with the scanner.
Never the less for what it is and diagnosing engine sensors was very useful on my old 540i which was another German ignition system that had a typical appetite for engine sensors!

P1667 is," Engine anti theft signal circuit low". "Serial link short to earth".
 
Me neither on this one as the code isn't even listed on the Generic code list that came with the scanner.
Never the less for what it is and diagnosing engine sensors was very useful on my old 540i which was another German ignition system that had a typical appetite for engine sensors!

You've got the oil burner?
 
The Plot thickens.....seems like the BECM in the vehicle has been changed.
LR Yeovil are being as much use as an inflatable dartboard and finally said if I wait a few weeks for £200 they might be able to extract the VIN from the BECM that I can the use to order the correct key fob!
Luckily Mozz is on the case but cannot believe how unhelpful they are!!

Fuming!
 
The Plot thickens.....seems like the BECM in the vehicle has been changed.
LR Yeovil are being as much use as an inflatable dartboard and finally said if I wait a few weeks for £200 they might be able to extract the VIN from the BECM that I can the use to order the correct key fob!
Luckily Mozz is on the case but cannot believe how unhelpful they are!!

Fuming!

Might be looking at Faultmate territory. Not sure the Nanocom will help unless the BECM was left unlocked?

@Rick-the-Pick is the BECM expert.
 
The Plot thickens.....seems like the BECM in the vehicle has been changed.
LR Yeovil are being as much use as an inflatable dartboard and finally said if I wait a few weeks for £200 they might be able to extract the VIN from the BECM that I can the use to order the correct key fob!
Luckily Mozz is on the case but cannot believe how unhelpful they are!!

Fuming!
check the becm on top visually,everyone ive sold c/w keys etc i used a permanent marker recording the reg/ vin & eka clearly written for future reference, you could be lucky.
 
Thanks Chaps,

Through the help of Mozz and everyone else I am going to send the BECM off to Rick the Pick with the new key to get it all sorted once and for all!
Rick tells me he can also set the BECM up so it immobilises once the key unlocks the door which future proofs the issue.

I feel I was unnecessarily harsh on Yeovil LR in my frurstrations and they have delivered the goods regarding the information required of the new key to enable me to get it recoded to the current BECM.

Quite a saga but good to know there's people out there willing to be so helpful!
 
Thanks Chaps,

Through the help of Mozz and everyone else I am going to send the BECM off to Rick the Pick with the new key to get it all sorted once and for all!
Rick tells me he can also set the BECM up so it immobilises once the key unlocks the door which future proofs the issue.

I feel I was unnecessarily harsh on Yeovil LR in my frurstrations and they have delivered the goods regarding the information required of the new key to enable me to get it recoded to the current BECM.

Quite a saga but good to know there's people out there willing to be so helpful!
It does make you wonder, if the people who make them don't know how to fix them and all the money they charge, well !!!!o_O
 
What tipped me off the edge is when I finally got through to the workshop I asked can you pull the BECM VIN with your diagnostics I was told no........I believe that to be incorrect

Parts team were helpful but if you don't know the answer you shouldn't guess
 
Back
Top