p38 hevac problem

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

CHRISTOPHER LAWSON

New Member
Posts
6
Location
necastle upon tyne
Hi guy new to the site. iv got a problem with my hevac. iv replace the main control unit as the original had
a burnt track. now its replace only one of the blend motors are working. in some ways its goo as non worked before. does anyone have a copy of eas unlocker I could lend/ use to se what codes are faults its showing.
don't want to start chucking stupid money at it without looking at the codes first. iv got the lead as im using the free version or the air suspention.

any help on what it could be or locating the program would be appricated.
I would go to rsw solutuions and but it but don't have £160 at the minute lol.
 
Hi Chris and welcome.

EASunlock only handles the Electronic Air Suspension. For HEVAC and the rest of the modules on the car you will need someone with a Nanocom or possibly a Hawkeye or Lynx.Try looking at the Land Rover International Rescue map and see if there is a member near you with diagnostics.

incidentally, you might want to check the part number on your unit with @martyuk 's post on HEVAC units in the Technical Section.
 
If you want to make a day out with the missus to whitby, I'll be there all next week and will have my nanocom with me.
Happy to read the codes if you came down.
There is probably someone closer but the offer is there if you want.
 
Hi thank for the relay iv see a video about the version 4 that’s reads the hevac and bcm.
Would love a nanocom but can’t afford £500 lol
Only paid that fir the car.
If you want to make a day out with the missus to whitby, I'll be there all next week and will have my nanocom with me.
Happy to read the codes if you came down.
There is probably someone closer but the offer is there if you want.
 
Back
Top