P38 - Fuse 10 (Seats) keeps blowing.......

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
kieronf

kieronf

New Member
Posts
223
Location
Holsworthy, Devon
P38 - 1996 4.6 HSE Auto - Fuse 10 (Drivers seat) keeps blowing, even when the seat isn't being adjusted.

Just driving along the 'Fuse 10 failed' message appears.

I would be grateful if anyone has got any ideas ideas or fixes.....
 
most probably a dead short to earth from the seat wiring to the frame, this happened to me not long ago and i ended up unbolting the seat from the frame and found the wiring to the seat motor had been trapped by the air blower funnel under the seat.
 
You must log in or register to reply here.

Similar threads

8v_chris
P38A Heated Seats - my arse is cold!
Replies
10
Views
1K
Rubberknees
Rubberknees
steveshone
p38 fuse box following conversion from petrol 4.6 to diesel 2.5
Replies
7
Views
2K
mystery
mystery
Jamscone
SOLD - P38 Range Rover v8 4.6 litre HSE 109,000 miles - £1800
Replies
1
Views
1K
Jamscone
Jamscone
H
L322 Window and Mirror weirdness
Replies
1
Views
2K
kermit_rr
kermit_rr
C
Sat Nav Screen powering on then off, and repeat for random times.
Replies
8
Views
1K
Chummers
C
Back
Top