P38 Diesel Low Ratio Probs (auto)
- Thread starter johnmuk
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 67,778
- Location
- halfway between here and there.
hi,make sure you are stopped before doing this.Hi just picked up the new (to Me) rangyone small hiccup is that when you move the selctor across the H gate to Low Ratio the bally thing beeps and Select Neutral falshes constantly. However it does seem to select the LR gears....any ideas???
arron beast unleashed
New Member
- Posts
- 348
- Location
- mablethorpe, lincs
funny your having this problem, i had two range rovers in over the weekend with the same faults. the first was the transfere box control unit under the passenger seat and the second beasts problem was the stepper motor had seized on the transfere box, its a pretty common failing as most people never use the low box on range rovers so they tend to get dry joints in the control unit and seized stepper motors. if you dont have a rovacom system to test it with take the stepper motor of first and power it direct to see if it motors in both directions, if it does the problem is the control unit.
Cheers, I've got a feeling it will be the stepper as i've only just bought and the previous owner (extreamly well serviced and looked after though it has been) was a Single mum....can't see that she has used LR much lol...how easy are they to change out?
Don't havea rovacom myself...anyone in the NE Durham/middlesbrough area that can help....I have beer!
Don't havea rovacom myself...anyone in the NE Durham/middlesbrough area that can help....I have beer!
- Posts
- 67,778
- Location
- halfway between here and there.
hi,you have gone and done it now,you have mentioned BEER,they will be coming from all over the place now,especially ratty,ha,ha,ha,hope you get it sorted,gemsdad.
op2::beer2:
Irishrover
Well-Known Member
- Posts
- 5,317
- Location
- La Trimouille, Vienne, France
Andy 0253 has a Rovacomlite and lives in Durham...send him a PM, he's a sound guy and if he can help out, I am sure he will.:behindsofa::beer2::beer2::beer2::beer2:
al-one-arm
Well-Known Member
- Posts
- 409
- Location
- burnham-on-sea,somerset
read this to see if it helps
http://www.landyzone.co.uk/lz/f10/select-neutral-2-secs-after-ign-switched-60591.html
http://www.landyzone.co.uk/lz/f10/select-neutral-2-secs-after-ign-switched-60591.html
- Posts
- 67,778
- Location
- halfway between here and there.
hi al,just read the tale of the hi/low motor,what happened in the end,you cannot leave it hanging like that,i have to know
,cheers gemsdad
al-one-arm
Well-Known Member
- Posts
- 409
- Location
- burnham-on-sea,somerset
update , now put onto original thread
