sim1cats
New Member
- Posts
- 10
- Location
- Waterlooville hampshire
Hi Can anybody tell me which is the best Hi lift cam kit for my 1997 range rover P38 4.0L any help most appreciated
P38 best hi lift cam kit
- Thread starter sim1cats
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
real steel cyclone
best power band for a heavy range rover and is a straight swap -if you run a cam with more lift (JE 102, piper 270, real steel stump puller) then you need to remove 0.1inch off the top of the valve guide and use double springs to avoid coil bind, bounce and resonance. These cams will make more power at the top end but you will loose out on low-mid range torque so are not really best suited to a car like the range rover.
best power band for a heavy range rover and is a straight swap -if you run a cam with more lift (JE 102, piper 270, real steel stump puller) then you need to remove 0.1inch off the top of the valve guide and use double springs to avoid coil bind, bounce and resonance. These cams will make more power at the top end but you will loose out on low-mid range torque so are not really best suited to a car like the range rover.
Last edited:
pornstarmax
Active Member
- Posts
- 400
Got a stealth from V8 Developments in mine, got spread of torque, but is more focused around top end....
...Sounds like a machine gun on over run.
You will need bulleted guides and double valve springs.
Just out of interest what state are your heads in?
...Sounds like a machine gun on over run.
You will need bulleted guides and double valve springs.
Just out of interest what state are your heads in?
