Heh everyone I`m a new boy so please excuse any misunderstanding of terminology!I have a 4.0 p38 on GEMS,the other day it almost ground to a halt but not quiet,got it back to the workshop @ plugged her in & got camshaft position sensor no signal so changed it for another & all was good for a day!then it started to missfire when under load,mainley just pulling away up hill so plugged her in again & it came up with MAF so I changed that but no good,I pulled all the plugs which were only a couple of months old as are the leads,going to tyr a coil pack tommorow.The computor is currentley showing `NO CODES PRESENT`! Any body have any ideas if the coil pack does`nt sort it out ?many thanks Ro.
