Oxy V Plasma

L

Lee_D

Guest

• Sep 14, 2004

• #21

"Steve Taylor" <[email protected]> wrote in message
news:[email protected]...
> Lee_D wrote:
>>
>> It was the blowing heads off bolts that won me over. Especially looking
>> at a few on the Rangie which are well past it.
>
> I'd like to see how you'd do that.
>
> Steve

Suppose it depends on the thickness it'll cut. Is there anything to suggest
one wouldn't out of curiosity ?

 

S

Steve Taylor

Guest

• Sep 14, 2004

• #22

Lee_D wrote:

>
> Suppose it depends on the thickness it'll cut. Is there anything to suggest
> one wouldn't out of curiosity ?

I don't see how I can strike the Plasma sideways across the bolt head,
and "flush" with the plate we are knocking the bolt head off.

Steve

 

L

Lee_D

Guest

• Sep 14, 2004

• #23

"Steve Taylor" <[email protected]> wrote in message
news:[email protected]...

> I don't see how I can strike the Plasma sideways across the bolt head, and
> "flush" with the plate we are knocking the bolt head off.
>
> Steve

But if it'll channel metal and isn't limited to 4mm then it should be able
to eat the centre out of the bolt thus causing the head to expire? Bit like
plasma drilling? It's would require intense butchery skills though ;-)

Lee D