Overnighter Camper Trailer Build
- Thread starter Bobsticle
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Bobsticle
De Villes Advocaat
- Posts
- 26,332
- Location
- Manchester
Tiz a veritable cornucopia of awesomeness. Well, trial and errorLooking good there Mr Sticle
Started bashin mi ally today...............Mrs
brianp38dse
Well-Known Member
- Posts
- 19,572
- Location
- heathrow
Tiz a veritable cornucopia of awesomeness. Well, trial and error
Started bashin mi ally today...............Mrs
OWWW i likes a bit off bashning, lead roofs are fun
Barney’s Landy
Active Member
- Posts
- 80
- Location
- East Anglia
Stabiliser number one
down
View attachment 212321
Going up
View attachment 212322
Hup.
View attachment 212323
hand wheel next
Edited
Very good work.
Bobsticle
De Villes Advocaat
- Posts
- 26,332
- Location
- Manchester
It’s all just getting exiting and I’m back to work again tomorrow
Bobsticle
De Villes Advocaat
- Posts
- 26,332
- Location
- Manchester
Woohooo. It’s Wednesday.
only problem is I’m coping mi garden wall tomorrow and probably Friday anorl.
back on it on Saturday though
only problem is I’m coping mi garden wall tomorrow and probably Friday anorl.
back on it on Saturday though
Bobsticle
De Villes Advocaat
- Posts
- 26,332
- Location
- Manchester
Small update. Tomorrow I will mostly be incredible.
Finally finished the second stabiliser today so back to bashin. I just hope there are enough breaks in the rain as I need to pull the trailer outside to offer the 2nd 8 foot skirt up to the front for measurin and stuff.
Finally finished the second stabiliser today so back to bashin. I just hope there are enough breaks in the rain as I need to pull the trailer outside to offer the 2nd 8 foot skirt up to the front for measurin and stuff.
Bobsticle
De Villes Advocaat
- Posts
- 26,332
- Location
- Manchester
Sall goin on.
Bobsticle
De Villes Advocaat
- Posts
- 26,332
- Location
- Manchester
Who the hell talked me into angling the bed up at the back
it was all going so well until I started the sill on the sides
Any road up, I’m ploughing on let’s face it, if your too thick for the building trade they send you to tin bashing school
finished the front bit
it was all going so well until I started the sill on the sides
Any road up, I’m ploughing on
let’s face it, if your too thick for the building trade they send you to tin bashing school finished the front bit
Bobsticle
De Villes Advocaat
- Posts
- 26,332
- Location
- Manchester
While collecting ancillaries and digging through old buckets in mi sheds for lighting and stuff I became perplexed by my unnecessary need for a high level brake light.
I want one but hate the modern LED offerings that won’t match never mind be sympathetic to the glass domed Lucas offerings.
I’ve decided as a pleasant diversion to convert a pork pie for my needs.
Naturally my ten quid D lamp is a little unloved so I began a touch of electrolysis today to at least get down to something approaching metal. I will have to convert it from stop and tail to a single lens but as we all know, it can’t be hard
we won’t be needin the lighty downy bit for a number plate either so that’ll av to go.
the number plate and light will be a whole other story
I want one but hate the modern LED offerings that won’t match never mind be sympathetic to the glass domed Lucas offerings.
I’ve decided as a pleasant diversion to convert a pork pie for my needs.
Naturally my ten quid D lamp is a little unloved so I began a touch of electrolysis today to at least get down to something approaching metal. I will have to convert it from stop and tail to a single lens but as we all know, it can’t be hard
we won’t be needin the lighty downy bit for a number plate either so that’ll av to go.
the number plate and light will be a whole other story
Bobsticle
De Villes Advocaat
- Posts
- 26,332
- Location
- Manchester
Those that know anything about electrolysis will know, clothes pegs with dickybirds and clouds on are indeed completely necessary.
- Posts
- 9,018
- Location
- North Lincs
But I thought that was my attempt failed, I used ordinary pegsThose that know anything about electrolysis will know, clothes pegs with dickybirds and clouds on are indeed completely necessary.
Hicap phill
Well-Known Member
- Posts
- 15,396
- Location
- Wiltshire
Ooo the price for pork pie lights. Good find for a tenner
- Posts
- 15,144
- Location
- Benfleet, Essex
- Posts
- 9,018
- Location
- North Lincs
Serious question Bob, what voltage do you use? I have acquired a small adjustable power supply to have a go at electrolysis my self.
I had thought to keep it at 12 volts and limit the current to an amp or so?
I had thought to keep it at 12 volts and limit the current to an amp or so?
Bobsticle
De Villes Advocaat
- Posts
- 26,332
- Location
- Manchester
Ain’t a clue. I just kept turning it up until the house fuse blew then knocked it down a notch.
I think plating is more complex As you have to calculate surface area etc. For rust removal just use an old phone charger and make sure the negative goes on the workpiece. Think mine is a six volt but only a couple of amps.
Two hours and it’s done. I knew there was real mecul under there
Will put the wire wheel over it tomorrow, give it a squirt of etch primer then start rebuilding the missing bits of backplate.
I must try and get the hinge pin out first
I can beat the dents out of the cover then and remove the crossbar ready for this bad boy.
Bobsticle
De Villes Advocaat
- Posts
- 26,332
- Location
- Manchester
Just six weeks labour to get it how I want it
Bobsticle
De Villes Advocaat
- Posts
- 26,332
- Location
- Manchester
Something has to work eventually.
Bobsticle
De Villes Advocaat
- Posts
- 26,332
- Location
- Manchester
Hinge pin out, wheeled and Fertan soaked then a squirt of etch primer.
Cover dechromed, beaten to remove dink and cross bar removed so the lens will fit.
I am trying some liquid weld to build up the missing steel then will fill and rub back several times until something acceptable is achieved.
Even got mi air cut.
Oh, and soldered in a blank for the downy lighty bit.
Cover dechromed, beaten to remove dink and cross bar removed so the lens will fit.
I am trying some liquid weld to build up the missing steel then will fill and rub back several times until something acceptable is achieved.
Even got mi air cut.
Oh, and soldered in a blank for the downy lighty bit.
Bobsticle
De Villes Advocaat
- Posts
- 26,332
- Location
- Manchester
Black I think
Ain’t got a stop light bulb holder and ran out of bothered with the original one as it was a bit shot so I found a couple of self adhesive red LED strips in one of my buckets and wound them round the walls inside the pie of pork. A damn site easier and less drain on the car. I’ll have to test them to see if they provide enough illumination during day time. If not I can revisit them once I have bodywork to actually hang it off.
Ain’t got a stop light bulb holder and ran out of bothered with the original one as it was a bit shot so I found a couple of self adhesive red LED strips in one of my buckets and wound them round the walls inside the pie of pork. A damn site easier and less drain on the car. I’ll have to test them to see if they provide enough illumination during day time. If not I can revisit them once I have bodywork to actually hang it off.
Last edited:
