P38A Outer cv joint front

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
stuu

stuu

Well-Known Member
Posts
1,979
Location
Aberdeenshire
mine appears to be letting heaps of grease out and is torn.
How much of a job is it?
Wheel breaks and upper and lower balljoint and hub off aye?
Thanks
 
Not too bad. I did a write up in the How To or Technical Archive section. I think the photosgot lost when the site moved but there is Word document version in Google Docs.

No need to touch ball joints, just whip the hub off. Plenty of Plusgas and a hammer - real Landy work.
 
stustrong said:
3-4hours work you rekon? Got an afternoon to do it in
Click to expand...

Yeah, not bad. The hardest part is getting the hub off. Don't rush that part. Plusgas, cup of tea while it soaks, score round edge with screwdriver or punch or similar, back the bolts off and then hammer bolts. Repeat about 3 times and it'll suddenly go and you're away.
 
stustrong said:
Abs fault on that front corner too so pair of sensors to do aswell
Click to expand...
Get new collars for them as well. Mine were seized in the carrier so had to be destroyed to get the hub off. New sensors and collars fitted and I elongated the hole in the dust cover so that if I ever have to take the hubs off again the sensors can stay in place
 
You must log in or register to reply here.

Similar threads

Mark Piercy
P38A Front wheel bearing
Replies
15
Views
1K
Mark Piercy
Mark Piercy
Blob
L322 ABS Re-learn Procedure? Is there such a thing?
Replies
5
Views
556
Blob
Blob
A
FACELIFT Freelander 2005 outer front CV joint - specialized ?
2
Replies
25
Views
3K
Arnodafe72
A
F
FL1 Front Drive Shafts + More
Replies
8
Views
653
GrumpyGel
GrumpyGel
M
Freelander 1 Front wheel driveshaft cv joint pulling out
Replies
6
Views
2K
aerosputnik
A
Back
Top