OT: Wheel quiz - trailer refurb

Ok a little OT but seeing as there are other car freaks besides myself.

I need to find a 12 inch dia wheel with 4 studs and pcd if 114 mm or 4 1/2 "

I can replace for bigger wheels but would rather get one spare instead of 5
replacement wheels and tyres IYSWIM

ideas anyone?

Lee
--
www.lrproject.com
Reaching the parts other Landrover restorers can't reach - JLo makes new
home in the USA.
Percy IIa - two Engines to the mile, awaits a new chassis.
Morph - He's "living the dream".

Lee_D wrote:
> Ok a little OT but seeing as there are other car freaks besides myself.
>
> I need to find a 12 inch dia wheel with 4 studs and pcd if 114 mm or 4 1/2 "
>
> I can replace for bigger wheels but would rather get one spare instead of 5
> replacement wheels and tyres IYSWIM
>
> ideas anyone?

IIRC early Ford Anglia were 4 on 4.5" with a 12" rim

--
EMB

"Lee_D" <[email protected]> wrote in message
news:[email protected]...
> Ok a little OT but seeing as there are other car freaks besides
> myself.
>
> I need to find a 12 inch dia wheel with 4 studs and pcd if 114 mm or 4
> 1/2 "
>
Austin / Morris /etc 1100 and 1300 were, iirc 4 stud, 4 1/2" pcd, 12".
Maxi were the same stud spacing but 13", as were Allegros, and some
Marina vans. Watch out for the wheel offsets - I picture 1100 wheels as
deeply dished, but could be wrong, and for the centre hole size.

Vivas and Escorts were 4" or 4 1/4" pcd, I think.


--
Kevin Poole
**Use current month and year to reply (e.g. [email protected])***
Car Transport by Tiltbed Trailer - based near Derby

Hi lee, if you give my mate Terry in Beeline Trailers a rintg he will
be able to advise you. I seem to remember it's alot to do with loadings
etc, not just for the tyre but for the wheel.

Give him a ring on 01646 601999

Dave

"Lee_D" <[email protected]> wrote in message
news:[email protected]...
> Ok a little OT but seeing as there are other car freaks besides myself.
>
> I need to find a 12 inch dia wheel with 4 studs and pcd if 114 mm or 4 1/2
> "
>
> I can replace for bigger wheels but would rather get one spare instead of
> 5 replacement wheels and tyres IYSWIM
>
> ideas anyone?
>
> Lee

All the following are 114.3mm 4-stud PCD.

Daewoo. Matiz, Leganza
36mm offset, 56mm bore.
Honda. Accord 92>, Prelude 92>, legend 90>, Civic V-Tec 97> 38mm
offset, 64mm bore.
Hyundai. Accent, Atos, Coupe, Excel, lantra, Pony, Sonata
35.38mm offset, 67mm bore.
Kia. Clarus.
35.38mm offset, 67mm bore.
Mitsubishi. Carisma 1.8 16v, Colt >91, Lancer >91, Galant
35.42mm offset, 67mm bore.
Nissan. 200SX >94, Bluebird, Prairie, Primera
35.42mm offset, 66mm bore.
Rover 600, 800
35mm offset, 64mm bore.
Subaru. Justy 95>
35.38mm offset, 60mm bore.
Suzuki. Alto, Swift, Sedan
35.38mm offset, 60mm bore.

I think the most likely ones to find in 12"dia. would be the Daewoo,
Hyundai, Subaru and Suzuki ones.
Badger.

Badger <[email protected]> uttered summat worrerz funny about:

>> ideas anyone?
>>
>> Lee
>
> All the following are 114.3mm 4-stud PCD.

> I think the most likely ones to find in 12"dia. would be the Daewoo,
> Hyundai, Subaru and Suzuki ones.
> Badger.

Cheers all,,, lots to go at there.. hoping to stay at 12inch just for the
sapre save getting 5 and tyres.

Lee