Anaconda
Well-Known Member
- Posts
- 5,560
- Location
- Thames Valley
........does it matter?
(1989 Ninety)
(1989 Ninety)
Oil in rear wheel bearings....
- Thread starter Anaconda
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
tottot
Well-Known Member
- Posts
- 8,567
- Location
- west wales coast
With a 1989 model that is how it should be. The gear oil is shared from the diff like the series landys.
If you are changing say a hub seal then a smear of grease on the bearings to keep them happy until more oil migrates from the diff [keep diff topped if you have had an oil leak.]
A better system in my mind than the later sealed axle/grease hub system of later models. Some even convert newer models to the old oil system.
If you are changing say a hub seal then a smear of grease on the bearings to keep them happy until more oil migrates from the diff [keep diff topped if you have had an oil leak.]
A better system in my mind than the later sealed axle/grease hub system of later models. Some even convert newer models to the old oil system.
