P38A obd2 socket wiring diagram

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

tomcat59alan

Well-Known Member
Posts
18,611
Location
wirral and triquivijate
Afternoon peeps. As per title. 1995/6 4ltr Gems.Did a search but no results.I've stripped out the socket and have no power.I cannot access Rave but have checked all fuses under the bonnet. Will check the ones under the drivers seat later. Was called in by the Enemy halfway through the job.any pointers welcomed, excluding divorce .;):DPS the Faultmate works on the diesel and is licenced for the petrol.​
 
Afternoon peeps. As per title. 1995/6 4ltr Gems.Did a search but no results.I've stripped out the socket and have no power.I cannot access Rave but have checked all fuses under the bonnet. Will check the ones under the drivers seat later. Was called in by the Enemy halfway through the job.any pointers welcomed, excluding divorce .;):DPS the Faultmate works on the diesel and is licenced for the petrol.​
Power to OBDII connector pin 16 comes from fuse 33 5 amp engine bay fusebox
 
Not bad at moment. You may want to look at white 18 pin connectors C101/102 behind drivers foot well panel. Bottom of A post.
Good to hear that. I've checked the fuse and it has power to both sides. Guessing that the power to the socket is the red/grey wire and I was about to ask if it runs through the A post connectors. :D Job when it gets warmer. Ta
 
Good to hear that. I've checked the fuse and it has power to both sides. Guessing that the power to the socket is the red/grey wire snd I was about to ask if it runs through the A post connectors. :D Job when it gets warmer. Ta
Just to clarify. Connectors are white 18 pin C102/C202. Brown wire from fuse 33 goes to pin13 C102/C202 then to OBDII port pin 16.
 
Back
Top