mozz smith
Well-Known Member
- Posts
- 1,700
- Location
- tameside manchester
mrgorsky , hi mate I sent you an e-mail re screwdriver and o rings please check ,cheers mozz
o rings
- Thread starter mozz smith
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
mrgorsky , hi mate I sent you an e-mail re screwdriver and o rings please check ,cheers mozztomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
Mozz, is this some sort of code(sexual pervert) or R/R relevant
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
Grrrrrr
Technician, Bodgit & Scarper Ltd
- Posts
- 20,040
- Location
- Buckinghamshire, UK. ('95 DT)
I think Mr Gorsky had a spare screwdriver of the correct length to get at the o-rings through a suitable hole?
Grrrrrr
Technician, Bodgit & Scarper Ltd
- Posts
- 20,040
- Location
- Buckinghamshire, UK. ('95 DT)
I realise that doesn't sound much better!
Grit Valve
2000 4.6 Vouge
- Posts
- 12,465
- Location
- Plaistow
You guys i don't know what's so special about a screw driver , the one I bought the tip snapped .
If you use 3/8 extention pozy drive on a rachet more pressure better results .
If you use 3/8 extention pozy drive on a rachet more pressure better results .
Last edited:
- Posts
- 1,774
- Location
- Buckinghamshire.
Mozz, PM sent.
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
Well, its happened like my Mum said it would, I'm going blindYou guys don't know what's so special about a screw driver , the one I bought the tip snapped 3/8 extention pozy drive on a rachet more pressure better results .
Last edited:
Grit Valve
2000 4.6 Vouge
- Posts
- 12,465
- Location
- Plaistow
Well, its happened like my Mum said it would, I'm going blind
Don't forget deaf and dumb : D
More leverage with a rachet
They can learn the hard way.
Datatek
Well-Known Member
- Posts
- 46,356
- Location
- Near Poitiers SW France
I used a quarter drive socket set with 3 extensions and the appropriate driver bit.
Grit Valve
2000 4.6 Vouge
- Posts
- 12,465
- Location
- Plaistow
Cool data I got a long extention fortunately think its about 16 inches long
I always buy any tool needed , got a bit of a collection now .
Don't need my taperd bearing seat driver kit now , but its useful for seating seals .
mozz smith
Well-Known Member
- Posts
- 1,700
- Location
- tameside manchester
Durty manc
I didn't think it would take that long to sink to this level ???????????????? typical scousers !!!!!!! and look at grit valve hes bragging at 16 inches ????????????
:drum:
Grit Valve
2000 4.6 Vouge
- Posts
- 12,465
- Location
- Plaistow
I didn't think it would take that long to sink to this level ???????????????? typical scousers !!!!!!! and look at grit valve hes bragging at 16 inches ????????????
Mozz,I can't be bragging I thought short and fat was better than long and thin
mozz smith
Well-Known Member
- Posts
- 1,700
- Location
- tameside manchester
Mozz,I can't be bragging I thought short and fat was better than long and thin
it depends how big the belly is !!!!!!!!!!! at the very least you need to put the tip in ?????????
Grit Valve
2000 4.6 Vouge
- Posts
- 12,465
- Location
- Plaistow
it depends how big the belly is !!!!!!!!!!! at the very least you need to put the tip in ?????????
Lol 46 14 stone I'm happy with that
mozz smith
Well-Known Member
- Posts
- 1,700
- Location
- tameside manchester
Grit Valve
2000 4.6 Vouge
- Posts
- 12,465
- Location
- Plaistow
I was thinkin about the woman ????????????????
I'm not even going to think of that !
My other half 28 she's got a fair bit to get that bad
