New Member needs help.

Catman100 · Jul 29, 2019

Hi all, I am a new member just joined.
I have just bought a '02 Defender 90 and I am in the process of upgrading the lighting to LED. Lights were easy enough to fit, except fog and reversing light that didn't come with fixings but the main problem I have is cannot find where to fit the relay for the indicator lights. The video on You Tube bears no relationship to my Landy's configuration.
My configuration is, no relays behind the metal plate but 3 yellow and one brown below the metal plate and I have 3 relays under my drivers seat, 2 yellow and one black. Any help would be appreciated.
Thanks Catman100

Hicap phill · Jul 29, 2019

Welcome.
Turn the hazards on & listen.
It may be behind the fuse cover

Catman100 · Jul 29, 2019

Hicap phill said:
Welcome.
Turn the hazards on & listen.
It may be behind the fuse cover

Hi, thanks, tried that but couldn't hear anything over he sound of the indicators in the cab, so guess maybe not there, what I haven't tried is listening to the relays under the drivers seat.

brianp38dse · Jul 29, 2019

Welcome to landyzone

the sound in the cab is probably the relay.

Catman100 · Jul 30, 2019

brianp38dse said:
Welcome to landyzone
the sound in the cab is probably the relay.

Sound in cab is from the dash, unfortunately, and extremely loud . Might go back to Company where I bought the lights to see what they have to say.

brianp38dse · Jul 30, 2019

The indicator relay is normay in the dash so you can here that you are indicating.

Catman100 · Jul 30, 2019

brianp38dse said:
The indicator relay is normay in the dash so you can here that you are indicating.

Thanks, guess I will have to take the dash off, more uncharted waters for the novice.

Hicap phill · Jul 30, 2019

Look my the gear levers. That black cover with 2 knobs remove it & see if there are any relays(you may see the tops behind the fuses) before you remove the dash

Catman100 · Jul 30, 2019

Found it, who would have thought that there were more relays behind the dash board. All fitted and working well, thanks for those who responded.

RangeRoller dt · Jul 30, 2019

Be prepared before taking your dash out. I did it once on a 90 and it was way worse than expected. I still have nightmares about it

Catman100 · Jul 31, 2019

RangeRoller dt said:
Be prepared before taking your dash out. I did it once on a 90 and it was way worse than expected. I still have nightmares about it

Hi, Thanks for the warning, I didn't have too much of a problem except that the plastic frame and holder ( not very technical description ) were cracked and broken in a couple of places, so I have made the decision to replace both. Watched a video on You Tube of how to do this and decided I will give it to a garage to do, happy to change a fuse but changing a dashboard is maybe a step too far. Maybe if I had a workshop or garage I would tackle it.

Hicap phill · Jul 31, 2019

But you will be in the dry...
Upload a photo of what is broken

RangeRoller dt · Jul 31, 2019

I’m happy enough to take my dash out on my RR even with all the computers. If I had to do another 90 dash - I myself would give it to a garage - can’t be dealing with that again

Hippo · Aug 2, 2019

Welcome to the forum

New Member needs help.

Catman100

New Member

Hicap phill

Well-Known Member

Catman100

New Member

brianp38dse

Well-Known Member

Catman100

New Member

brianp38dse

Well-Known Member

Catman100

New Member

Hicap phill

Well-Known Member

Catman100

New Member

RangeRoller dt

Well-Sprung Member

Catman100

New Member

Hicap phill

Well-Known Member

RangeRoller dt

Well-Sprung Member

Hippo

Lord Hippo

Similar threads