Disco 2 New front springs

My disco is sagging on one side, by about 2 inches at the front. It always has, and I knew it when I bought it. Looking to replace the front springs, shocks, steering damper, Delphi ball joints and anything else that seems worn.

I dont want to lift the vehicle in any way, so can anyone recommend a good set of springs. I really dont want Britpart.

Was looking at OME but they only seem to do a 40mm lift version.

I did this on mine last year. Used standard springs (for me the recommended was REB000330) with Bilsteins (also the steering damper).
Very satisfied with the result.

B6's ? How did you find them. Was looking at them. But, I will be having an OME damper on the steering...

Sorry but genuine is your best bet with standard heights. Shocks are a bit of a minefield but all i can say is britpart super gaz are a hard ride.

ronsealdeath said:

Sorry but genuine is your best bet with standard heights. Shocks are a bit of a minefield but all i can say is britpart super gaz are a hard ride.

Click to expand...

... ah but he might like a hard ride, I do!

My springs need some small blue pills...

tilly2 said:

B6's ? How did you find them. Was looking at them. But, I will be having an OME damper on the steering...

Click to expand...

I have bought them from Paddock. Still available there.

I mean find them as in against the originals.... lol

tilly2 said:

I mean find them as in against the originals.... lol

Click to expand...

Sorry for missunderstanding, I am not native english speaker
Originally I had 2" lift by using britpart set. So I can not compare to that (shocks were out anyway). First I installed KYB springs and Monroe shocks and found them too soft and one side of my car was a bit down (about 1" compared to other). The KYB was also the standard one but for pre-facelift model so I have changed them to the correct one which together with Bilsteins give much better feeling and also the car sits higher and even.