needed 200 tdi power steering pipes

I'm needeing the pipe from the resevior to the steering box and the other pipes that run from the pump. I've just found out that millatry power steering is differant from the civvie box as it uses bigger fittings and here was me thinking all 4 bolt boxs were the same. Or is it the n/a type power steering is a differant fitting. Anyway any body got any ideas where I can get these parts , nothing on ebay. cheers

if you get desperate a hydraulic place will make pipes up or my mate had a similar issue with a classic-had an adapter machined

Funny thing is......I might just have a set.....god knows how you'd post em though.

3 sets int there?

oil dripper said:

3 sets int there?

Click to expand...

possibly

cheers guys but it's sorted, there was pipe ends in both the threaded holes, that was the prob . didn't relize till Igot the box back out n had a look again :doh::behindsofa: so only left with getting the smaller of the two threaded holes sorted cause there's a bit damage to that , so that it'll not let the union thread in. Sorry .

needle file set would clean thread edge -what I would use or a tap to re cut thread

fanatic said:

needle file set would clean thread edge -what I would use or a tap to re cut thread

Click to expand...

Cheers fanatic tried that but ended up going to my local blacksmith and he sorted the thread and union. S o the steering box is in and new belt fitted. Is all now fine.