Nanocom & Key Syncing

smac02 · Dec 22, 2012

Looking for advice from Nanocom expert. Searched threads but cannot find my problem explained.

Been fiddling with my new Nanocom Evo and when messing with the ignition/door key syncing menus find that my two keys are listed in slots 1 and 2. But, in slots 3, 4 and the suspension fob slot there is an identical code listed in all three. When I try to clear the slots with the codes I don't recognise they just re-appear when I write to the ECU.

There seems to be no ill effects to my alarm/locking but would just like to know how to clear the wrong key codes and why they are there.

thought it was mine! · Dec 22, 2012

a big hammer normally fixes most things. or gaffer tape

sierrafery · Dec 22, 2012

smac02 said:
Looking for advice from Nanocom expert. Searched threads but cannot find my problem explained.

Been fiddling with my new Nanocom Evo and when messing with the ignition/door key syncing menus find that my two keys are listed in slots 1 and 2. But, in slots 3, 4and the suspension fob slots there is an identical code listed in all three. When I try to clear the slots with the codes I don't recognise they just re-appear when I write to the ECU.

There seems to be no ill effects to my alarm/locking but would just like to know how to clear the wrong key codes and why they are there.

you will be able just to change them if you want not to erase them completely cos those were stored already

thought it was mine! · Dec 22, 2012

smac02 said:
I take it then you are not the expert I was looking for.

nope dont worry u will get your answers

smac02 · Dec 22, 2012

sierrafery said:
you will be able just to change them if you want not to erase them completely cos those were stored already

Ok, thanks. That explains it to me. I can change them but not erase them.

Nanocom & Key Syncing

smac02

Member

thought it was mine!

New Member

sierrafery

Well-Known Member

thought it was mine!

New Member

smac02

Member

Similar threads