Datatek
Well-Known Member
- Posts
- 46,309
- Location
- Near Poitiers SW France
The problem has been found and a software upgrade will be available shortly to correct the problem on the 4 HEVAC sensors affected
Nanocom & Faultmate Incorrect negative temperature readings.
- Thread starter Datatek
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 58,170
- Location
- Preston Lancs.
The problem has been found and a software upgrade will be available shortly to correct the problem on the 4 HEVAC sensors affected
Did this not get sorted with Nanocom BBS 1.06?
Datatek
Well-Known Member
- Posts
- 46,309
- Location
- Near Poitiers SW France
Nope, it affects Rovercom, Faultmate and Nanocom, it appears no one has ever noticed the temeprature readings below zero are gobbledegook. Hard to test unless you are working in an unheated garage in winter
- Posts
- 58,170
- Location
- Preston Lancs.
Nope, it affects Rovercom, Faultmate and Nanocom, it appears no one has ever noticed the temeprature readings below zero are gobbledegook. Hard to test unless you are working in an unheated garage in winter
As my garage is heated i will not be investigating the problem then. Had years of working in unheated garages, sod that for a game of soldiers. I'll just wait for the update.
