mudflaps

hi chaps waner take front mudflaps of but scews rusted can i drill theme :dohut thanks . bernie :doh::doh:

The screws are pretty hard, I had to use a grinder on the screws on the rear mudflaps on mine.

Just get a 3.5mm-4mm drill and drill the heads off. You should then be able to remove the mudflaps and get hold of the threaded part with a pair of vice grips to remove it.

Did mine with a grinder as well.

thanks lads only paint bubbling behind them got to do it befoure winter sets in.

Irishrover said:

Just get a 3.5mm-4mm drill and drill the heads off. You should then be able to remove the mudflaps and get hold of the threaded part with a pair of vice grips to remove it.

Click to expand...

The screws on mine just rounded the end of the drill and went shiney Even ruined a special drill for stainless

hi,replaced them today,it took me 2 hours,ended up unscrewing the rusted screws with a pair of pliers after soaking them with sonax for 30 min from the back and front,it was a bugger ended up with blood and sweat,at least got the new ones there with the same cleaned screws.cheers.
i did it without removing the rear tires lol

dont be too happy , you have a p38