Chrisfrain2007
Active Member
- Posts
- 958
- Location
- Telford
There's a p38 on evil bay at mo with a 2.8 Mitsubishi diesel motor in? Any one seen any thing like it before? Can't link it cuz on me phone 
Mitsubishi powered p38
- Thread starter Chrisfrain2007
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Mark L
Well-Known Member
- Posts
- 2,693
- Location
- Tamworth - Staffs
Chrisfrain2007
Active Member
- Posts
- 958
- Location
- Telford
Tah
Yes a company in bristol called Stanton Drew used to do this conversion but i dont think they exist any longer.There's a p38 on evil bay at mo with a 2.8 Mitsubishi diesel motor in? Any one seen any thing like it before? Can't link it cuz on me phone
Chrisfrain2007
Active Member
- Posts
- 958
- Location
- Telford
Will have a delve into info on it, be interesting to see how they got the electrickery. BIts to work together
Stanton Drew, Bristol, Avon BS39 4ES
Tel: 01275 332512 ...............................dont know if this number is still in use.
Davie F
Active Member
- Posts
- 380
- Location
- North East Scotland
Kind of wondered why anyone would bother, at least the 4m40 is better than the 4d56 zen and as you say would certainly like a drink.
Davie
Davie
Chrisfrain2007
Active Member
- Posts
- 958
- Location
- Telford
Just had a quick Google, there's a company doing conversions to international 2.8 tgv engines ( whatever they are ) and also the TDV6 conversions.
) and also the TDV6 conversions.
Grit Valve
2000 4.6 Vouge
- Posts
- 12,465
- Location
- Plaistow
the mitsubishi 4m40 engine is an old tech engine it puts out 125 bhp with the mechanical pump or 150 bhp with the electronic pump although the later pumps can give problems .
i work on these engines all the time and are generally a reliable unit , they do have a reputation for cracking heads but this is normally due to poor maintainance .
would i fit one in a p38 , no i dont think so they can be thirsty especially if you have heavy boots if looked after properly though they can easily do 200`000 plus miles .
rick.
i work on these engines all the time and are generally a reliable unit , they do have a reputation for cracking heads but this is normally due to poor maintainance .
would i fit one in a p38 , no i dont think so they can be thirsty especially if you have heavy boots
if looked after properly though they can easily do 200`000 plus miles .rick.
gfromleeds
Well-Known Member
- Posts
- 2,234
- Location
- leeds. westyorkshire, uk
Holy thread revival batman!!!!!
gfromleeds
Well-Known Member
- Posts
- 2,234
- Location
- leeds. westyorkshire, uk
Oh and hi picies please
