Mini wipers on to Defender ??

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

landowner

Pensioner Pete
Full Member
Posts
13,222
Location
WA2
My off side wiper arm is a little loose so I thought I would tighten it up, you'll never guess what happened..:doh:
I knew the little bolt would snap off because it was very cold and the bolt was prob rusted in and it's only lickle, but I put the vice grips on it anyway and hey presto, off she snapped.
What I was wondering was, has any one fitted a Mini wiper rack and motor to a Defender.?

Or can you swap the wheel boxes for Mini ones (not Mini 'one') but classic Mini, Triumph, etc and then fit the arms and blades off the Mini which look to be the same size.

This is before I start stripping the motor and rack out of me 110, dont even know where it is yet ..:)
 
I take it you mean the spindle adaptor, if you can drill the bolt out you can get replacement ends, there may be one on the mini ones you have if not pm me;) i have one here
 
Back
Top