manually raising the suspension

so like the rsw video shows remove fuse and jumper the pins with engine running will this lift the suspension for me??
obviously as a very temp fix? so i can either get underneath or lpg in it?

wrxfifer said:

so like the rsw video shows remove fuse and jumper the pins with engine running will this lift the suspension for me??
obviously as a very temp fix? so i can either get underneath or lpg in it?

Click to expand...

You do seem to be having trouble mate. Firstly is the pump running. If it is, take the EAS exhaust filter off, if air is coming out of that the diaphragm is split. You will not get suspension to rise with no air pressure.Let me know what you find.

you will have to explain to me where the exhaust filter is and what it looks like?? i have put my hand on it with lid off the box the long black thing vibrating? if so yes

there must be air pressure as it lifted its self before i went away so would this work or not?

someone must know?

suspump Have you read this Grant ?

Range Rover Air Suspension repair, advice and troubleshooting by Rover Renovations.

Or here

it all looks very helpful but seems a bit technical for me to be honest

There is no short cuts other than those posted or having the software etc. to enable you to manually "Drive" the system.
Do you know any one with a bit of electrical experience that you can work alongside and learn how it's done??

I'll even knock up and post you a set of "Pigtails" if you want them (F.O.C.) !!!

wrxfifer said:

you will have to explain to me where the exhaust filter is and what it looks like?? i have put my hand on it with lid off the box the long black thing vibrating? if so yes

Click to expand...

Look over wing at EAs control box. Now look on it to right hand between it and engine. You will see a possibly white filter unscrew it. If when the pump is running air is coming from this the diaphragm is split. You must change that before you do anything else. If it is only a slight split sometimes it is possible for suspension to rise after a long time as yours did. Maybe it has now got a big split and air is just leaking past it. Check and see if it is before you do anything else. If it is ok we can try something else. But you must have air pressure, if you have not got that anything else is a waste of time until you do.