Mantec Wheel Carrier....Ping Richard

Hi all,

I have a Mantec Wheel carrier currently sat on my 200Tdi. Will it fit
onto my TD5 90?

The TD5 is a 2000 Model and has the 2 part (original style) rear door.
I am aware that the crossmember is different though but arent sure if
the carrier will bolt straight to it?

Anyone know?

Thanks
Jon

Jon <[email protected]> uttered summat worrerz funny about:
> Hi all,
>
> I have a Mantec Wheel carrier currently sat on my 200Tdi. Will it fit
> onto my TD5 90?
>
> The TD5 is a 2000 Model and has the 2 part (original style) rear door.
> I am aware that the crossmember is different though but arent sure if
> the carrier will bolt straight to it?
>
> Anyone know?
>
> Thanks
> Jon

Jon can't help but would hazard a wild guess it would fit.

While your pinging Richard wonder if he can recommend anywher local I can
get lengths of steel cut , say the height of the chassis at it's deepest
(IIa). The idea being to buy some strips for the work on Percy to save
having to buy a whole sheet, this would also cut down on the amount of
plasmering I need to do and make it easy to transport.

Lee

In message <[email protected]>
Jon <[email protected]> wrote:

> Hi all,
>
> I have a Mantec Wheel carrier currently sat on my 200Tdi. Will it fit
> onto my TD5 90?
>
> The TD5 is a 2000 Model and has the 2 part (original style) rear door.
> I am aware that the crossmember is different though but arent sure if
> the carrier will bolt straight to it?
>
> Anyone know?
>
> Thanks
> Jon

As far as I know it should fit ok.

Richard

--
www.beamends-lrspares.co.uk [email protected]
RISC-OS - Where have all the good guys gone?
Boycott the Yorkshire Dales - No Play, No Pay

On Wed, 03 May 2006 17:55:48 +0100, beamendsltd
<[email protected]> wrote:

>In message <[email protected]>
> Jon <[email protected]> wrote:
>
>> Hi all,
>>
>> I have a Mantec Wheel carrier currently sat on my 200Tdi. Will it fit
>> onto my TD5 90?
>>
>> The TD5 is a 2000 Model and has the 2 part (original style) rear door.
>> I am aware that the crossmember is different though but arent sure if
>> the carrier will bolt straight to it?
>>
>> Anyone know?
>>
>> Thanks
>> Jon
>
>As far as I know it should fit ok.
>
>Richard

Thanks Richard, I had a quick peek last night and I suspect you are
right, the bolt holes in the cross memeber look about right.

Thanks
Jon