LT230 Bearings (Timken etc replacement numbers?) 96 D1

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
S

Scot Kight

Guest
Two questions, if my bearings are shaking a bit in the races (IE I can shake
the race and hear the taperbearings in there) would that indicate the
bearings are bad? When I had the output shaft out before the bearings could
move a bit in the races, but I have read a few other messages which
indicated that is not proper and the bearings should be replaced. This of
course leads me into the second question, does anyone know the timken or
other USA available third party bearing replacement part numbers for both
bearings? The dealer isn't open today or tomorrow, but some of the parts
places are and I would like to get at least the two bearings on the output
shaft replaced, if they are bad as described above.

I found one site that lists up to 95, but does not show the 96 replacement
part.

Thanks!
Scot


 
In message <ScvGd.24010$sf5.11034@lakeread05>
"Scot Kight" <[email protected]> wrote:

> Two questions, if my bearings are shaking a bit in the races (IE I can shake
> the race and hear the taperbearings in there) would that indicate the
> bearings are bad? When I had the output shaft out before the bearings could
> move a bit in the races, but I have read a few other messages which
> indicated that is not proper and the bearings should be replaced. This of
> course leads me into the second question, does anyone know the timken or
> other USA available third party bearing replacement part numbers for both
> bearings? The dealer isn't open today or tomorrow, but some of the parts
> places are and I would like to get at least the two bearings on the output
> shaft replaced, if they are bad as described above.
>
> I found one site that lists up to 95, but does not show the 96 replacement
> part.
>
> Thanks!
> Scot
>
>

The output shaft bearing is FRC7871, the front and rear
flange bearings are STC1130.

If you have ay difficulty obtaining them, then the old
ones will have a unique number on them that any bearing seller
should be able match.

Cheers
Richard
--
www.beamends-lrspares.co.uk [email protected]
Running a business in a Microsoft free environment - it can be done
Powered by Risc-OS - you won't get a virus from us!!
Helping keep Land Rovers on and off the road to annoy the Lib Dems
 
Back
Top